We will reply to your message within an hour.
Use these collets to securely hold round-shank tool bits in the R8 spindle of a milling machine.
Install into an ER-32 collet chuck or holder to tightly grip round-shank tool bits in milling machines.
These collets tightly grip workpieces when installed into a 5C collet chuck or holder. They provide a stronger hold on small workpieces than a standard lathe chuck. Choose from collets that can grip round-, hexagon-, or square-shaped workpieces.
Install into an ER-16 collet chuck or holder to tightly grip round-shank tool bits in milling machines.
Install into an ER-20 collet chuck or holder to tightly grip round-shank tool bits in milling machines.
Use these collets in milling machines that have an ER-25 collet chuck. With a round face and adjustable body, they compress to grip round-shank drill bits, end mills, reamers, and taps.
Insert into a 16C collet chuck or holder to tightly grip round workpieces. They provide a stronger hold on small workpieces than a standard lathe chuck.
Install into an ER-11 collet chuck or holder to tightly grip round-shank tool bits in milling machines.
Install into a 100-TG collet chuck or holder to tightly grip round-shank tool bits in milling machines.
When installed into a 3J collet chuck or holder, these collets securely grip round workpieces. They provide a stronger hold on small workpieces than a standard lathe chuck.
Also known as emergency collets, these collets have a machinable face for boring an opening to the exact size and shape you need.
The head on these collets acts like a mandrel to support the inside of a hollow workpiece. It can be machined to fit the exact ID of your part.
Insert into a 16C collet chuck or holder to tightly grip workpieces.
When installed into a 3J collet chuck or holder, these collets securely grip workpieces.
Also known as step collets.
These collets tightly grip workpieces when installed into a 5C collet chuck or holder. They provide a stronger hold on small workpieces than a standard lathe chuck.
Hold collets in the spindle of a milling machine.
Install a 5C collet into one of these chucks to hold a workpiece for machining parallel or square edges and drilling crossholes.
Install and remove 5C collets in CNC lathes.
Ensure parts don't push back into the collet while machining.
Connect bits to RotoZip spiral saws.
Use to attach taps to Procunier auto-reversing tap holders.
Attach taps to auto-reversing tap holders for Jacobs taper shanks.
After installing the R8 body in the milling machine spindle, tool holders can be switched out in seconds.
These holders work with any 5C collet to rigidly grip drill bits, taps, end mills, and other tools.
Two slide-in dovetail mounts on the tool posts allow you to quickly change from one tool holder to another.
Attach tool holders such as collet chucks and end mill holders to your CNC machine’s spindle.
Hold end mills, drills, and reamers securely in manual milling machines that have an R8 taper spindle.
Securely grip end mills in machines with a CAT 40 taper spindle.
Convert tools with a Morse taper shank to an R8 shank for use in manual milling machines that have an R8 taper spindle.
Drill extremely small holes with a drill press using these adapters. The shank fits into a collet or adjustable drill chuck, and the other end securely holds a wire gauge drill bit.
One end attaches to your SDS-drive rotary hammer, and the other end attaches to a drill chuck so you can perform regular drilling and driving operations with round- and hex-shank drill bits.
Pair with Dremel rotary tools to securely grip bits and burs.
Use these grinders for light, intermittent grinding, deburring, and finishing.
Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.
More durable than our Light Duty Grinders, these are designed for more frequent use.
The lightweight, pencil-sized grinder in these kits works at high speeds and is more durable than light duty grinders, making it good for frequent use.
High-quality bearings ensure long spindle life, even when grinders are used continuously.
Collect the dust, debris, and fine particulates you generate while grinding by attaching the plastic dust hood on these grinders to a vacuum system.
For fast accessory changes without any other tools, twist these wrenches to loosen and tighten the collet on your Dremel grinder.
The bendable shaft with handpiece lets these grinders operate smoothly with less vibration, noise, and heat than other hand-held grinders.
Remove excess material and smooth workpieces with these tools, also known as die grinders.
Also known as die grinders.
Use these grinders for occasional light grinding, deburring, and finishing.
Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.
With high-quality bearings and collets for long spindle life, these grinders are rated for continuous use to take on tough jobs.
Grip and release parts using 5C collets. Use on milling machines, drill presses, or anywhere else you can mount this fixture.
Control clamping action with air. Use 5C collets to grip and release parts on milling machines and drill presses.
Used with a 5C collet, these fixtures rotate round, hex, or square workpieces up to 1 1/8" diameter in precise increments. Also known as spindexers or punch formers.
Use multiple fixtures to create a workholding system capable of clamping and unclamping multiple parts with the push of a button.
Pass wires and rods through the hollow body of these vises.
Sets include four vises with different opening sizes. A hollow body allows wires and rods to pass through.
Clamp and unclamp with one hand by sliding the knurled ring forward to close the collet.
Each end of the vise has a collet to hold a different tool—turn the collar to close the collets around them.
Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the vise with your fingertips.
A rubber-covered body provides a comfortable grip. These vises have a rotating end cap on the handle that allows you to apply constant pressure while turning the body of the vise with your fingertips.
When a job calls for a 5C collet, save time by using an adapter instead of removing your lathe chuck.
No need to break down a collet set up when a workpiece doesn't fit a 5C collet. Install one of these lathe chuck adapters in your 5C collet chuck or holder and its three jaws will securely grasp the workpiece.
The mandrels in these sets have an expanding screw that widens the end of the mandrel for a tight hold on the inside of a workpiece.
An expanding screw widens the end of the mandrel for a tight hold on the inside of a workpiece.
The sleeve on these mandrels expands to hold a range of diameters for better versatility than solid and expanding-end mandrels.
Use an arbor press to secure the narrow end of one of these tapered mandrels into the hole of a workpiece.
Hold your tungsten electrode in place during TIG welding with these collets.
Attach TIG torch nozzles to TIG torches with these collet bodies.
All the TIG torch accessories you need to get started in one kit, including collets, collet bodies, and nozzles.
The diamond grinding wheel on these grinders creates a fresh point on electrodes for frequent TIG welding. These electric grinders work more quickly and precisely than chemical sharpeners.
Weld threaded studs and pins to steel and stainless steel without damaging the opposite side of the material. This process uses heat from resistance to an electrical current.
Secure bits into hole makers for tapping sheet metal.
Make plunge cuts with the rotating cutting bit, or attach a cutoff wheel for straight cuts.