We will reply to your message within an hour.
With an internal spring mechanism, these punches offer one-hand operation when marking hole centers.
With an internal spring mechanism, these Starrett punches offer one-hand operation when marking hole centers.
Use the Starrett punches in these sets to mark hole centers in metal and other materials. Also known as center punches.
Strike these Starrett punches with a hammer to mark hole centers in metal and other materials. Also known as center punches.
Also known as center punches, strike these with a hammer to mark hole centers in metal and other materials.
Also known as center punches, the tools in these sets mark hole centers in metal and other materials.
Ground to a sharper tip than other center-marking punches, these tools make the precision marks required for the intersection of lines and other detailed tasks. They're also known as prick punches.
Made of aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking.
Punch has two viewing lenses. One has a circle and dot and one has a crosshair to enable you to pinpoint the location where you need to punch. Replace the lens with one of the two included punches and strike it with a hammer to mark the hole center.
Fit these through existing holes and mark the center of the hole in a second workpiece.
Fit the punches in these sets through existing holes and mark the center of the hole in a second workpiece.
These sets come with three punches for use with a variety of hole sizes. Insert one into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.
Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.
Also known as blind-hole spotters, the punches in these sets fit into closed-end holes and mark the center of a complementary hole.
Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole.
Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes.
Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once.
Also known as transfer screws, the punches in these sets can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole.
The punches in these sets have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Also known as transfer screws.
Align the level to find and mark the vertical center of curved surfaces.
Locate and mark the centerline on rods, tubes, and pipes, lay out keyways, and establish angles for connections.
Punch soft materials and scribe lines in metal and wood.
An insulated handle and shaft protects against shock from accidental contact with live electrical circuits. These awls are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
Impact-resistant steel makes these punches stronger and more durable than standard pin-removal punches.
Use these sets to knock out pins and rivets that have already been loosened.
Minimize damage to your work surfaces with these brass punches, which are softer than steel punches.
The punches in these sets have a knurled handle, which offers a more secure grip than standard punches. Use them to knock out pins and rivets that have already been loosened.
The rounded tip of these punches fits into the open ends of hollow and spring pins to protect them from damage during removal.
Loosen pins and rivets before removal.
The knurled handle of these punches offers a more secure grip than standard punches. Use pin-removal punches to knock out pins and rivets that have already been loosened.
Knock out pins and rivets that have already been loosened. These tools are also known as pin punches.
Made of materials that are Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.
A soft brass body minimizes the damage these punches make on work surfaces.
A hammer and punch in one, this tool knocks out pins, rivets, and bolts.
Contains pin-loosening, pin-removal, and center-marking punches.
Contains pin-loosening, pin-removal, and center-marking punches as well as chisels.
Line up holes by driving these pins through existing rivet, pin, and bolt holes in multiple pieces of metal. Alternatively known as lineup taper punches.
When one side wears out, use the other one. Also known as barrel drift pins.
These brass tools reduce marring on metal surfaces because they're softer than steel punches.
When one side wears out, use the other one.
Made from aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.
Use alignment pins to align structural components such as I-beams and angle iron for bolting, riveting, and welding.
Sets include three punches in various point diameters to set nails flush or drive them out of view without damaging wood surfaces.
Set nails flush or drive them out of view without damaging wood surfaces.
Punch a hole in your material to prepare for the installation of fabric grommets. Strike these tools with a mallet.
Screw one of the interchangeable heads into the included handle to create holes up to 3/16" dia. in tight spaces.
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
Quickly switch between inner and outer punches to create washers faster than with standard sets.
Sets include common ID and OD sizes to create gaskets and washers in two strikes.
For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.
Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.
Use these one-piece tools to make round holes up to 1 3/4" dia.
Use these punches to make round holes up to 1" dia. in fabric, leather, and rubber.
Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.
Make oblong holes in fabric, leather, and rubber. Also known as arch punches.
Create holes for installing heavy duty industrial connectors. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly.
Use a wrench to cut DIN-size holes in steel up to 1/16" thick.
Cut DIN-size holes in steel up to 7/64" thick using a driver ram and hydraulic pump.
These steel punches cut through aluminum and steel fast to make openings for DB connectors.
Create larger holes and make repeated punches with these drivers that supply 11 tons of force to stud-driven hole punches.
Supply eight tons of force to your stud-driven hole punch to make straight punches.
Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to stud-driven hole punches.
Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.
The driver supplies eight tons of force to the hole punches in this set to make straight punches.
Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.
Punch conduit up to size 1 1/4.
The included hydraulic driver allows you to punch conduit up to size 2.
Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.
The body is cast steel.
Squeeze the spring-return handle to punch round holes of a single size.
Cut keyways at the edges of existing holes. Also known as a keyway nibbler.
About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.
These punches are half the size of standard portable lever-operated punches. They come with punches and dies in varying sizes.
Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°.
These medium duty tools have more than double the punching force of compact portable lever-operated punches.
A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material.
Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.
Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.
Roller bearings in the lever provide low-effort punching.
Includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material.
Turn the handle of these punches while pushing down to punch holes in cork and rubber.
Our strongest punch, this tool has 35 tons of force to punch through tough materials such as bus bars, railings, and I-beams.
Protect your hands from accidental hammer strikes by gripping punches and chisels with these holders.
Place these plastic pads under the material you're punching to protect work surfaces and keep punch edges sharp.
Attach these saws to your portable drill to cut a range of large diameter hole sizes in sheet metal.
Use these saws with a drill press to cut a variety of hole sizes in sheet metal.
Cut through spot welds on sheet metal and make faster, more precise cuts than drill bits and other hole saws.
Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.
These high-speed steel saws cuts through aluminum, brass, bronze, and steel.
The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.
An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures.
These saws reduce friction and prevent material buildup when cutting fiberglass and plastic.
The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium.
Specially designed teeth cut faster than the teeth on standard hole saws.
These standard saws have high-speed steel teeth.
The carbide teeth on these saws last up to twice as long as high-speed steel teeth.
Quickly connect these saws to your drill or drill press with the built-in arbor.
With two adjustable blades, these saws cut a variety of hole sizes in ceilings, walls, floors, and other surfaces made of drywall, plaster, plastic, and wood. To block flying chips and collect dust, they have a clear debris shield.
These saws have high-speed steel teeth.
The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.
The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth.
These saws have carbide-grit-coated teeth.
The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites.
These kits have saws with high-speed steel teeth and a steel body.
The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets.
Enlarge holes by using an existing hole as a guide.
Chip ice, start holes in thin metal and wood, and punch holes in leather, plastic, and other soft materials.
Twist these tools on the spring-clip to remove it.
Drive out chain pins with a twist of the handle.
Tighten the hex head screw with a wrench to remove chain pins without damaging side plates.
In addition to breaking chain, these tools can also rivet chain to increase strength for better performance on high-speed drives.
Ensure a firm grip on your stamp and keep your fingers away from stray blows.
Create flares around already-cut holes in sheet metal up to 3/16" thick to make the edges stronger and more rigid. Also known as dimple dies.
Secure a hole saw to a drill or drill press with one of these arbors and use the built-in pilot drill to guide the hole saw.
Switch hole saws without using adapters or special tools.