We will reply to your message within an hour.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.
These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
Ridges keep these aluminum shims from sliding apart when stacked. Designed for aligning shafts and axles, they support heavier loads than plastic tapered shims.
Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.
Use these washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Choose these washers for their adherence to strict military standards for material and construction.
SAE washers generally have a smaller ID and OD than USS washers.
Also known as Type B washers, ASME washers are available in narrower and wider diameters than SAE and USS washers.
USS washers generally have a larger ID and OD than SAE washers.
Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.
Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.
As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.
Also known as crush washers, these compress when tightened to form a tighter, more durable seal than rubber washers. They are commonly used to seal fluids such as oil and fuel.
Made of aluminum, these spacers are lightweight and mildly corrosion resistant.
The anodized coating on these lightweight spacers provides increased abrasion resistance over uncoated aluminum.
Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.
Cut stock to the length you need.
Create a custom shim to fit your application.
Also known as crush washers, the washers in these assortments compress when tightened to form a tight, durable seal that prevents leaks.
Have different sizes and lengths of spacers ready for a variety of jobs.
Need to join two female-threaded parts, such as coupling nuts, with dissimilar inch thread sizes? Attach them to these adapters and tighten the exterior hex nut for a secure connection.
Twist these adapters onto female metric threads to change pitch or switch thread sizes.
One side inch, one side metric, and a hex in the middle—these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench.
In addition to joining male- and female-threaded parts, these adapters can increase or decrease metric thread sizes and change the thread pitch.
Change thread sizes or types, such as fine to coarse threads, on parts without changing gender.
Change inch threads to metric with these adapters, or swap metric threads for inch. An external hex lets you tighten or loosen them with a wrench.
Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.
Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.
Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.
Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.
These aluminum inserts are lightweight, nonmagnetic, and mildly corrosion resistant.