We will reply to your message within an hour.
More
These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.
The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.
Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.
A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.
A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.
Particles in liquid won’t clog these nozzles because of their unique internal and external design.
These nozzles project their spray at a right angle from their threaded connection.
Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.
The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.
With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.
Save time in applications where you often need to replace worn nozzles. These nozzles consist of a base and a nozzle, so you can replace the tip with just a quarter turn.
These nozzles provide a uniform distribution of droplets.
A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.
Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.
A check valve prevents the nozzle from dripping when it is turned off.
Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off
Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.
A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.
By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.
Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.
Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.
These nozzles produce a flat, thin spray pattern.
Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.
No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.
Specifically designed for steam, these nozzles direct steam better than standard spray nozzles.
FM approved for use in fire-protection applications, these nozzles produce a heavy, coarse spray to quickly put out fires.
Attaching a spray nozzle to these swivel fittings allows the nozzle to swivel 360° and tilt on a 45° range.
Drill a hole in your pipe and connect one of these fittings to create a connection point for a spray nozzle or swivel fitting.
Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.
This hose is made of steel.
The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.
These nozzles handle coolant pressure up to 150 psi.
For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.
Adjust the flow while dispensing liquid chemicals.
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.
Control the flow while dispensing diesel fuel with these nozzles.
Dispense and control the flow of coolant with these nozzles.
Nozzles allow you to control the flow while dispensing hydraulic fluid.
Attach these chucks to your air hose so you can connect the hose to Schrader valves.