We will reply to your message within an hour.
These doors are UL fire-rated to help prevent the spread of fire.
These doors come hung in a sub-frame that mounts into your existing door frame.
Made of stainless steel, these doors stand up to corrosive wet environments.
Also known as wraparound frames, these are for use in drywall.
Also known as flush frames, these are for use in brick and block walls.
These double doors are UL fire-rated to help prevent the spread of fire.
Secure dock doorways and other large openings.
Bumpers on both sides protect these doors from forklift traffic. The polyethylene plastic holds up in refrigeration and washdown environments.
Made of impact-resistant polyethylene with bumpers on both sides, these doors withstand forklift traffic as well as refrigeration and washdown environments.
Select these doors when complete visibility is important.
Maintain the temperature in cold storage or other areas—these doors bend to open only as much as needed.
These doors open only as much as needed, making them good for cold storage areas.
Gravity hinges allow these doors to swing closed after being pushed open from either direction.
Two-way hinges allow these doors to swing closed after being pushed open from either direction.
Cut to the length you need with shears or a utility knife and punch holes for hanging.
Replace worn strips or create a custom door with these individual strips. They completely block light to maintain darkness and privacy.
Completely block light with these strip rolls. Cut them to the length you need and punch holes for hanging.
The holes are already punched in these strips for convenient installation.
Cut these partially light-blocking strips to the length you need and punch holes for hanging.
These strips are ribbed to hide scratches and wear; cut them to length with shears or a utility knife and punch holes for hanging.
These strips are ribbed to hide scratches and wear.
These partially light-blocking strips can be used to replace worn strips or create custom strip doors.
Sized to fit short openings.
Cut these strips to the length you need for hanging in freezer doorways or other cold environments.
Often hung in freezers, these strips can be used in food-service environments.
Cut these strips to the length you need to hang doors for data centers and other areas where static build-up could harm sensitive electronics.
Hang these strips near data centers and other areas where static build-up could harm sensitive electronics.
Able to handle temperatures up to 500° F, these door strips can be used near ovens and furnaces.
These ribbed door strip rolls hide scratches and wear and can be used in food-service environments.
Allow personnel and vehicles to move freely through doorways while keeping heated or cooled air in and dirt, dust, and debris out.
Create custom doors that allow vehicles and people to move freely, while keeping heated or cooled air in and dirt, dust, and debris out.
Completely block light to maintain darkness and privacy, while allowing traffic to flow freely.
To hide scratches and wear, these doors have ribbed strips.
Often hung in freezers, these doors can be used in food-service environments.
These strip doors partially block light.
Use these doors in data centers and other areas where static build-up could harm sensitive electronics.
To minimize strain on your door strips, these plates have a hinge that swings when personnel or vehicles pass through.
Swap out damaged mounting plates or make custom strip doors by combining a mounting plate with door strips.
Sized to fit short openings, these strip doors are often used with conveyors to prevent the loss of heated or cooled air through unprotected openings.
Access your roof from inside your building.
Produce a stream of air down a doorway or other opening to keep out dust, dirt, insects, and fumes while allowing personnel to pass through.
Sized for use in coolers, offices, and other locations with limited clearance above doorways.
These curtains generate a stream of warm air to maintain inside temperatures when doors are open in cold weather.
Made of stainless steel, these air curtains stand up to corrosive wet environments.
These panels are made of UV-resistant plastic and have a gasket to create a tight seal.
After installing in drywall, cover the perforated flange with drywall compound and only the panel will be visible for a clean finish.
Lock these access panels to prevent tampering.
Slide the frame apart using its notched tabs to adjust its height and width in 3/8" increments.
These rectangular panels have gaskets that form a tight seal to keep out dust and moisture.
Designed for use with circular cutouts, these panels have gaskets that form a tight seal to keep out dust and moisture.
Panels are insulated to prevent heat from passing through.
These panels contain 2" of fire-rated insulation.
Use these rectangular panels to access and inspect the interior of tanks and hoppers.
Install on circular cutouts to access and inspect the interior of tanks and hoppers.
Install these panels in wet concrete on new floors and sidewalks to access equipment below the surface.
These flexible ports are often used to inspect insulated pipes and tanks for corrosion.
Mount gates on one side of a doorway and lock them on the other for security without sacrificing visibility and air circulation.
Roll these portable, wall-mounted gates wherever you need temporary access control.
Mount gates on each side of a doorway and lock them together in the center for security without sacrificing visibility and air circulation.
Secure windows and other small openings without sacrificing visibility and air circulation.
An electric motor automatically raises and lowers these screens.
These manual screens are spring-loaded to assist in the raising and lowering the screen.
Also known as wired glass, the glass contains wire mesh that holds it together if broken.
The glass is impact resistant and provides a clear, unobstructed view.
See out your door without others seeing in.
Design your own partitions, add to your existing partition, or replace individual components and hardware.
Use one of these kits to replace rusty or broken hardware on urinal partitions.
Replace rusty or broken hardware on your toilet partitions without needing to buy the entire component.
These kits include all brackets and fasteners needed for mounting partitions.
Gates collapse for easy transport and storage.
The carbon fibers on one side of these curtains ground electrical charges to eliminate static.
You can see and walk through these strip curtains.
The panels open and close by turning the knobs.
Also known as cleanouts, panels cover cutouts in duct to provide access for inspection and cleaning.
Join duct and fittings with quick-release clamps for faster disassembly and cleanout than other duct systems.
Protect your door knobs from being broken off to gain entry.
Choose these guards if you need door knob guards that each open with a different key.
Choose these guards if you need several door knob guards that open with the same key.
Choose these guards if you need door handle guards that each open with a different key.
Choose these guards if you need several door handle guards that open with the same key.
Cover the gap between your door and frame to protect the latch bolt from being pried open.
Conceal up to 2 1/8" dia. holes created when you remove a door handle.
Hide gaps around your handles.
These mounting plates reinforce the door around your pry-resistant handle and help guard against forced entry.
Use these mounting plates to reinforce the door around your handle to guard against forced entry.
Eliminate gaps around your deadbolt locks.
These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars.
All of these strike plates can be used with door handles and knobs.
Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars.
If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select these strike plates.