These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

A safety catch prevents accidental opening.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

These latches are typically used to secure hoods and covers.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

The latch arm is coated with vinyl so it won't scratch surfaces.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Use these L-handle latches to draw lightweight surfaces together.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

Lift and turn the handle 180° to open and close this lock.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.