The standard for high-strength fastening.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Their ultra-low-profile lets them fit in the tightest spaces.

For use where sideways forces are a concern, these screws have a precisely measured unthreaded portion (grip) for a strong hold. Their flanged head distributes pressure where the screw meets the surface, so you don't need a washer.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are more than twice as strong as stainless steel wire-lockable screws. These resist vibration better than any other socket head screw.

No need for separate bits—these screws lock directly onto square-drive socket wrenches, reducing the risk of dropping parts during installation.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

These pan head screws are zinc plated for corrosion resistance in wet environments.

These screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws.

Choose these screws for their adherence to strict military standards for material and construction. Their high tensile strength means they can be used in demanding, high-stress applications.

Twice as strong as low-strength steel screws, these screws are suitable for fastening most machinery and equipment.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening. For use in medium-strength fastening applications.

These screws are the strongest we offer. They are about 20% stronger than high-strength steel screws and are often used in heavy duty applications such as stamping and earth-moving equipment.

Choose these screws for their adherence to strict military standards for material and construction. Screws are 18-8 stainless steel for good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

With the strength of steel and the corrosion resistance of 18-8 stainless steel, these 17-4 PH stainless steel screws are suitable for high-strength fastening in corrosive environments.

Plastic screws are chemical and oil resistant, nonconductive, and lightweight.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Our most corrosion-resistant metal screws, titanium screws withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio—stronger than medium-strength steel screws and about 40% lighter.

The most common heavy hex head screw, these steel screws meet ASTM A325 regulations for structural joints, such as mating I-beams and scaffolding.

Made from 316 stainless steel, these Grade B8M screws are more corrosion resistant than 18-8 stainless steel screws and have excellent resistance to chemicals and salt water. Screws meet ASTM A193 regulations, so they can be used in high-pressure and high-temperature applications. Also known as pressure bolts.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. The flange distributes pressure over the surface, eliminating the need for a washer.

Comparable in strength to Grade 9 screws, these are about 20% stronger than high-strength steel screws and often used in heavy duty applications, such as stamping and earth-moving equipment. The flange eliminates the need for a washer.

For the strength of Grade 9 steel and the corrosion resistance of stainless steel, choose these screws. They are work-hardened for extreme strength. The flange eliminates the need for a separate washer.

Made from Grade 5 steel, these screws are suitable for fastening most machinery and equipment. Serrations under the flange provide mild vibration resistance.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are more than twice as strong as our stainless steel thread-locking screws. The thread locker helps resist loosening from vibration.

These screws are made from zinc-plated Grade 5 steel that’s stronger than stainless steel and provides corrosion resistance in wet environments. When wired together, they resist vibration better than any other hex head screw.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These screws have good chemical resistance and may be mildly magnetic.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These steel screws cut threads in drilled holes as they’re turned, so they require less driving torque and cause less stress on your material than thread forming screws.

Comparable in strength to Grade 8 steel. These screws have inch thread sizes.

Made from 18-8 stainless steel, these inch-sized shoulder screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water. These screws have inch thread sizes.

Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.

Made from 316 stainless steel, these set screws have excellent chemical resistance and can be used in saltwater environments.

Use these steel set screws for light duty holding.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. A nylon locking element grips threads to resist loosening.

Made from 18-8 stainless steel, these set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These nylon set screws are chemical resistant, lightweight, and nonconductive. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These chemical-resistant 18-8 stainless steel screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

With a tip that's harder than nylon and silver, these alloy steel set screws provide a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

Also known as half dog-point set screws, these set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Use the square head to turn these screws by hand, or use a wrench when you need more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Stainless steel set screws have excellent corrosion resistance in most environments.

These alloy steel set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

The tip is narrow to pass through threaded holes.

Stainless steel set screws have excellent corrosion resistance in most environments.

Twice as strong as low-strength steel bolts, these bolts are suitable for fastening most machinery and equipment. Carriage bolts have a smooth, rounded head for a finished look. The square neck keeps these bolts from turning when tightening a nut.

Made from Grade 8 steel, these bolts can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. Carriage bolts have a smooth, rounded head for a finished look. The square neck keeps these bolts from turning when tightening a nut.

More corrosion resistant than 18-8 stainless steel bolts, these bolts have excellent resistance to chemicals and salt water. Carriage bolts have a smooth, rounded head for a finished look. The square neck keeps these bolts from turning when tightening a nut.

Made from 18-8 stainless steel, these thumb screws are chemical resistant. They have a thin, knurled head for use in low-clearance applications.

A thin, knurled head allows these thumb screws to be used in low-clearance applications. They have a black-oxide finish to resist corrosion in dry environments.

A raised head makes these thumb screws easy to grip. They have a black-oxide finish to resist corrosion in dry environments.

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

Stainless steel thumb screws have excellent corrosion resistance in most environments.

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

A wide tip provides more gripping power than standard swivel-tip thumb screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.