Pivot the head to access fasteners in tight spots. These wrenches have a ratchet mechanism that allows you to turn fasteners without removing and repositioning. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use. These wrenches come with a calibration certificate that is traceable to NIST or UKAS and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Pivot the head to access fasteners in tight spots. Set the torque and these wrenches will indicate when it’s reached with an audible click and an impulse in the grip.

Wrenches with a 1/2” square drive size meet ISO 6789 international calibration standards as well as ASME B107.300 safety standards for manual torque-measuring tools. To relieve pressure on the spring and maintain calibration, set these wrenches to 20% of the maximum torque when not in use.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

No need to pull the socket off the tool—push a button to release. Set torque and the wrench indicates when it's reached with an audible click and an impulse in the grip. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Unlike most torque wrenches, you don’t have to set torque to the lowest value on the scale after use. This wrench indicates when your set torque is reached with an audible click and an impulse in the grip. It's also known as a split-beam torque wrench. Wrench comes with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Breaker bar handle (sold separately) attaches to the head of your torque wrench to break stuck fasteners free without risking damage to the wrench. It extends for additional length.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

For technical drawings and 3-D models, click on a part number.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Set the desired torque and the wrench indicates when it's reached with an audible click. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use.

Note: Accuracy ratings apply to the entire torque range.

Warning: Do not use these tools in direct contact with acetylene.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900. Set torque and the wrench indicates when it's reached with an audible click and an impulse in the grip. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Calibration certificate with test data traceable to UKAS includes the test measurements that confirm accuracy.

For technical drawings and 3-D models, click on a part number.

Trust the precision of your measurements—these wrenches are accurate to ±1%. They display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. The display rotates so you can read it at any angle. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Measure with an accuracy of ±2.0%. These wrenches display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

These wrenches have an accuracy of ±2.0%. The display shows torque as it's measured and maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Reach the same torque every time with factory-set wrenches that indicate with an audible click and an impulse in the grip when set torque is reached. Wrenches come with a calibration certificate traceable to NIST that states the product has passed a test for accuracy.

Change the torque of these wrenches with adjustment keys (sold separately).

For technical drawings and 3-D models, click on a part number.

Use these tools for general shop applications. They have a ball-detent-style socket retainer that allows quick socket changes—pull the socket off the retainer and push on another one. Wrenches operate at full torque in both clockwise and counterclockwise direction. Air-powered tools require lubrication to operate properly.