Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

A magnet holds the fastener securely enough to drive self-tapping screws.

Extra length allows access to fasteners on long bolts.

Tighten or loosen nuts and bolts without damaging the finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra length allows access to fasteners on long bolts.

The hex shape grips hex fasteners and prevents rounding.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

For high quality at a lower price, choose these U.S.A.-made sets.

Pivot the head to access fasteners from an angle.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

The short bit on these sockets fits in spaces where height clearance is limited.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Lock your socket into the extension to prevent accidental disengagement..

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Convert from one square drive size to another.

Lock your socket into the extension to prevent accidental disengagement.

Push the square drive through the adapter to change size.

Extend your socket's reach.

Insulated to protect against accidental contact with live electrical circuits, these extensions are tested to 1,000 volts to meet IEC 60900.

Lock your socket into the extension to prevent accidental disengagement.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Adapters are set to a specific torque and cannot be adjusted.

Fit these adapters between your wrench and socket to enable finger tightening.

Bend these extensions around obstructions to access hard-to-reach fasteners.

A magnet holds the socket, making changes quicker.

Attach to your socket for a longer reach.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

No need to pull the socket off the tool—push a button to release.

Extend the shaft for additional length.

Position the head anywhere along the handle.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Measure with an accuracy of ±7%.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

Use these tools for general shop applications.

Hold different square drive sizes on the four clip rails stored in these trays.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

Magnets hold sockets securely in place.

Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.

These wrenches have one pivoting socket end and one open end.