These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Lock your socket into the extension to prevent accidental disengagement.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

The angled shape lets you use your bit driver like a wrench.

Pivot the head to access fasteners from an angle.

Use sockets with tools that accept hex shanks, such as impact drivers and power drills.

Attach to your socket for a longer reach.

These short sockets fit spaces where height clearance is limited.

Pivot the head to access fasteners from an angle.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

The six lobes of the External Torx-Plus drive are flattened at the top to maximize their grip on fasteners, which keeps these sockets from slipping off during high-torque installations.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

A magnet holds the fastener securely enough to drive self-tapping screws.

Quickly position these sockets on square fasteners.

A magnet holds the fastener securely enough to drive self-tapping screws.

Position the head anywhere along the handle.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Turn sockets from above when there's not room to swing a standard wrench handle.

Bend around obstructions to turn hard-to-reach fasteners.

No need to pull the socket off the tool—push a button to release.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

Use these tools for general shop applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

These sockets are also known as pin-in-Torx bits.

For high quality at a lower price, choose these U.S.A.-made sets.

Quickly position these sockets on square fasteners.

For high quality at a lower price, choose these U.S.A.-made sets.

Attach to your socket for a longer reach.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

These sockets are made to withstand the high torque and force of impact tools.