Search Results
Clear All
System of Measurement System of Measurement |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
|
For Housing ID For Housing ID |
|---|
|
Bearing Type Bearing Type |
|---|
 | Ball |
For Load Direction For Load Direction |
|---|
 | Radial |
OD OD |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
ABEC Rating ABEC Rating |
|---|
|
Ring Material Ring Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
ID ID |
|---|
|
Inner Ring Type Inner Ring Type |
|---|
| Standard |
Construction Construction |
|---|
|
Maximum Radial Clearance Maximum Radial Clearance |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Minimum Radial Clearance Minimum Radial Clearance |
|---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
|---|
|
About Ball and Roller Bearings
More
Self-Aligning Ball Bearings
Open
Sealed
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
| 2201 | 12 | 32 | 14 | Steel | 1,900 | 420 | 30,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
Sealed | |||||||||||||
| 2201-2RS | 12 | 32 | 14 | Steel | 1,400 | 320 | 16,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |