System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Housing ID For Housing ID |
---|
|
OD OD |
---|
|
ID ID |
---|
|
Ball Bearing Type Ball Bearing Type |
---|
![]() | Standard |
Bearing Type Bearing Type |
---|
![]() | Ball |
Construction Construction |
---|
|
Ring Material Ring Material |
---|
|
Lubrication Lubrication |
---|
|
Maximum Radial Clearance Maximum Radial Clearance |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Minimum Radial Clearance Minimum Radial Clearance |
---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
---|
|
Static Radial Load Capacity Static Radial Load Capacity |
---|
|
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Lubricant Lubricant |
---|
|
Shaft Mount Type Shaft Mount Type |
---|
|
More
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2203 | 17 | 40 | 16 | Steel | 2,350 | 570 | 24,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
Sealed | |||||||||||||
2203-2RS | 17 | 40 | 16 | Steel | 1,950 | 490 | 12,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |