System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
OD OD |
---|
|
ID ID |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Ball Bearing Type Ball Bearing Type |
---|
![]() | Standard |
For Load Direction For Load Direction |
---|
![]() | Radial |
For Housing ID For Housing ID |
---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
---|
|
Construction Construction |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Ring Material Ring Material |
---|
|
Cage Material Cage Material |
---|
|
Lubricant Lubricant |
---|
|
Maximum Radial Clearance Maximum Radial Clearance |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Minimum Radial Clearance Minimum Radial Clearance |
---|
|
More
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2307 | 35 | 80 | 31 | Steel | 8,900 | 2,500 | 12,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 0000000 |
Sealed | |||||||||||||
2307-2RS | 35 | 80 | 31 | Steel | 5,950 | 1,900 | 5,600 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |