Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

A magnet holds the fastener securely enough to drive self-tapping screws.

Extra length allows access to fasteners on long bolts.

The 12-point shape quickly positions on hex fasteners.

Quickly position these sockets on square fasteners.

The hex shape grips hex fasteners and prevents rounding.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

For high quality at a lower price, choose these U.S.A.-made sets.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Convert from one square drive size to another.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Convert from one square drive size to another.

Extend your socket's reach.

Change a standard wrench handle into a ratcheting wrench.

A magnet holds the socket, making changes quicker.

Attach to your socket for a longer reach.

The shaft on these wrenches extends and locks.

Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Position the head anywhere along the handle.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

Pivot the socket end to access hard-to-reach fasteners.

These wrenches have one pivoting socket end and one open end.

Choose these screws for their adherence to strict military standards for material and construction.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Cleaned and double bagged in an ISO Class 5 (Fed. Std. Class 100) clean room, these screws are ready to use on chambers and components in high-vacuum systems.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Aluminum screws are one-third the weight of steel and have good corrosion resistance.

Bronze screws are about 40% stronger than brass screws and provide more corrosion resistance to salt water, gases, and sewage. They are nonmagnetic and electrically conductive.

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

With a head one and a half times taller than a standard socket head, these screws are easier to install in deep counterbored holes and other hard-to-reach places.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a thread locker to resist vibration.

Stainless steel screws have excellent corrosion resistance in most environments. Wire these screws together for more vibration resistance than other types of socket head screws.

With a tensile strength of 180,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and more than two and a half times stronger than stainless steel screws with split lock washer. The split lock washer helps to resist vibration.

These general purpose flanged screws distribute pressure where the screw meets the surface, eliminating the need for a washer.

No need for separate bits—these screws lock directly onto square-drive socket wrenches, reducing the risk of dropping parts during installation.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

Nonconductive and softer than brass, the nylon tip reduces vibration and eliminates damage from metal touching metal.

More corrosion resistant than 18-8 stainless steel screws, these button head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Brass button head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Made from alloy steel, these screws are three times stronger than standard steel button head Torx screws. A Torx-Plus drive has more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

A286 stainless steel screws have comparable strength to alloy steel with the corrosion and chemical resistance of 18-8 stainless steel. They have a Torx drive that has more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

These screws have a Torx or Torx-Plus drive for more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

Comparable in diameter to a washer, the flange on these screws distributes pressure better than standard flanged screws. Made from 316 stainless steel, they have excellent resistance to chemicals and salt water. Screws may be mildly magnetic.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. The flange is wider and thicker than our other flanged screws, so they distribute pressure the best.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

To prevent unwanted removal, these screws have a tamper-resistant Torx drive—also known as a pin-in Torx drive—that makes them difficult to unscrew without special tools. An O-ring under the head blocks leaks and seals out dust and dirt.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. A nylon patch bonded to the threads adds friction to prevent loosening from vibration.

Choose these screws for their adherence to strict military standards for material and construction.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

A286 stainless steel screws have comparable strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

Made from alloy steel, these screws are nearly twice as strong as stainless steel flat head screws.

Prevent unwanted removal, leaks, and contamination with these sealing Torx screws.

These screws are drilled through the shaft to vent fluids and gases trapped under the screw.