These short sockets fit spaces where height clearance is limited.

Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

Grip the indentations around the outside of tri-groove fasteners.

The six lobes of the External Torx-Plus drive are flattened at the top to maximize their grip on fasteners, which keeps these sockets from slipping off during high-torque installations.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

The hex shape grips hex fasteners and prevents rounding.

Push the square drive through the adapter to change size.

Extend your socket's reach.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

Lock your socket into the extension to prevent accidental disengagement.

Fit these adapters between your wrench and socket to enable finger tightening.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Adapters are set to a specific torque and cannot be adjusted.

Bend these extensions around obstructions to access hard-to-reach fasteners.

Pivot the head to access fasteners from an angle.

Lock your socket into the extension to prevent accidental disengagement.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

With sizes from EP10 to EP24, these sets have the sockets you need to install and remove a wide range of External Torx-Plus fasteners. Pair them with a square drive tool, such as a socket wrench, to deliver high levels of torque without slipping.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

Lock your socket into the extension to prevent accidental disengagement..

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Attach to your socket for a longer reach.

The handle is covered in rubber for a comfortable grip.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

The shaft on these wrenches extends and locks.

Turn sockets in the most confined spaces.

No need to pull the socket off the tool—push a button to release.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Turn sockets from above when there's not room to swing a standard wrench handle.

Pivot the head for access to fasteners in tight spots.

Fasten quickly with these crank-style handles.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

Turn sockets from above when there's not room to swing a standard wrench handle.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Use these wrenches for medium-volume production, general maintenance, and construction applications.

Use these tools for general shop applications.

Store sockets on posts marked with the size.

Move the sliding clips to any position along the rail to hold a variety of sockets.

Magnets hold sockets securely in place.

Pair these tools with your ratchet wrench to get more leverage.