Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

This material has tighter tolerances than standard 304 stainless steel.

Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Offering outstanding resistance to surface wear and corrosion, Nitronic 60 stainless steel is often used for shafts, fasteners, and valves.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

One side of these sheets is polished to either a brushed or mirror-like finish.

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

These rods have been passivated for enhanced corrosion resistance.

2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.

A high nickel content allows Alloy 20 stainless steel to stand up to harsh chemicals in caustic environments. It's also known as Carpenter 20.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

This material is hardened for improved strength and wear resistance.

Offering outstanding strength, 15-5 PH stainless steel is often used for gears and shafts.

Widely used to fabricate fasteners and engine components, A286 will maintain its strength as temperatures rise.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

These balls are hardened for increased wear and abrasion resistance.

Precision ground on the top and bottom to a tight tolerance.

Bend this wire and it will stay in place. It's commonly used as tying and locking wire.

Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.

The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.

Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Cut this stock to length to create the machine key you need. Straight keys, with a square or rectangular cross section, are the most common type of key. Install in a keyway to transmit torque from shafts to gears and other components.

When your application does not require a smooth interior, this tubing is an economical choice.

This tubing is suitable for extreme-pressure applications reaching 15,000 psi—the highest pressure rating of all the tubing we offer.

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.

The outside of this tubing is polished to a high-luster finish for a shiny appearance.

This tubing has a 90° bend that holds its shape.

Trap small particles in low-flow applications—these sheets have tiny holes and small open area.

A convenient solution for inline filtering, discs are die cut for an exact diameter with smooth edges for use in tube, pipe, and duct.

Designed for use in food, pharmaceutical, and other sanitary environments, this precision wire cloth is sintered (fused together) to create a strong, smooth surface that’s free of crevices where contaminants can collect.

Maximize flow when straining your liquid process lines—material passes more quickly through this wire cloth's rectangular openings than through other wire cloth.

Also known as space cloth, wires are crimped where they intersect to maintain an accurate opening size when used with heavy materials. The crimping process also adds strength and rigidity.

Also known as Dutch weave, this wire cloth has a tight weave that traps tiny particles and provides strength for use in high-pressure and high-flow applications.

Combine with a machine key to transmit torque to gears, sprockets, and other power transmission components.

A flat surface area allows set screws to dig into the shaft for securely mounting gears, sprockets, and bearings.

Connect these internally threaded shafts directly to threaded components, or use a fastener to secure.

Clip retaining rings into the grooves to separate and position gears, sprockets, and bearings.

Internal threads allow you to mount these shafts onto threaded studs and fasteners, no shaft supports needed.

Replace worn shafts in two-piece support-rail shaft systems, or mate with a support rail to create your own. The tapped mounting holes match those on our Support Rails.