System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Load Direction For Load Direction |
---|
![]() | Combined Radial and Thrust |
Construction Construction |
---|
|
For Housing ID For Housing ID |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
ID ID |
---|
|
OD OD |
---|
|
Ball Bearing Type Ball Bearing Type |
---|
![]() | Standard |
Dynamic Combined Load Capacity Dynamic CombinedLoad Capacity |
---|
|
Static Combined Load Capacity Static CombinedLoad Capacity |
---|
|
ABEC Rating ABEC Rating |
---|
|
Ring Material Ring Material |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
---|
|
Contact Angle Contact Angle |
---|
|
Maximum Radial Clearance Maximum Radial Clearance |
---|
|
More
The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads.
Double-row bearings handle thrust loads in both directions.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Double Row | |||||||||||||
Open | |||||||||||||
3208 | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
Shielded | |||||||||||||
3208-2Z | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
Sealed | |||||||||||||
3208-2RS | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 5,600 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |