Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

Twice as strong as low-strength steel screws, these screws are suitable for fastening most machinery and equipment.

These screws are the strongest we offer. They are about 20% stronger than high-strength steel screws and are often used in heavy duty applications such as stamping and earth-moving equipment.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

Bronze screws are 30% stronger than brass screws and provide more corrosion resistance to salt water, gases, and sewage. They are nonmagnetic and electrically conductive.

Comparable in strength to Grade 9 screws, these are about 20% stronger than high-strength steel screws and often used in heavy duty applications, such as stamping and earth-moving equipment. The flange eliminates the need for a washer.

Made from Grade 5 steel, these screws are suitable for fastening most machinery and equipment. Serrations under the flange provide mild vibration resistance.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.

Made from 316 stainless steel, these set screws have excellent chemical resistance and can be used in saltwater environments.

Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension. A black-oxide finish provides corrosion resistance in dry environments.

About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening. Carriage bolts have a smooth, rounded head for a finished look. The square neck keeps these bolts from turning when tightening a nut.

Good for high-strength fastening, these screws are made from alloy steel comparable in strength to Grade 9 steel. The head makes 12 points of contact with a wrench to handle more torque than a socket head or hex head screw.

These are Grade 8 threaded rods.

Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion. About half the strength of medium-strength steel threaded rods, use them for light duty hanging, mounting, and fastening.

Grade B8 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges. They have good chemical resistance.

A hex drive on one end allows these rods to be turned with a hex key for ease of installation.

Also known as tap-end and fixture studs, these rods have friction-fit threads on one end to resist loosening and standard threads on the other side for attaching a nut.

Create your own lifting eye by adding an eye nut to a stud or bolt.

Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once.