Search Results
Clear All
System of Measurement System of Measurement |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
|
For Load Direction For Load Direction |
|---|
 | Combined Radial and Thrust |
For Housing ID For Housing ID |
|---|
|
Bearing Type Bearing Type |
|---|
 | Ball |
OD OD |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
Construction Construction |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
ID ID |
|---|
|
Static Combined Load Capacity Static CombinedLoad Capacity |
|---|
|
Lubrication Lubrication |
|---|
|
Contact Angle Contact Angle |
|---|
|
Lubricant Lubricant |
|---|
|
Maximum Radial Clearance Maximum Radial Clearance |
|---|
|
Minimum Radial Clearance Minimum Radial Clearance |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
About Ball and Roller Bearings
More
Angular-Contact Ball Bearings
Open
Sealed
The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Single Row | ||||||||||||||
Open | ||||||||||||||
| 7203 | 17 | 40 | 12 | Steel | 2,300 | 1,200 | 20,000 | Required | 40° | -20° to 230° | ABEC-3 | __ | 0000000 | 000000 |
Sealed | ||||||||||||||
| 7203-2RS | 17 | 40 | 12 | Steel | 2,350 | 1,250 | 11,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |