These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Securely fasten strut channel to the floor.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Slide the strut channel into the tube for telescoping length adjustments.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Connect two channels to create a stacked channel.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Serrated grooves grip the lip of the channel.

Notches on these washers grip the channel to keep them in place.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Slide drawers, panels, and doors with these tracks and rollers.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

Thick construction makes this framing strong and sturdy.

Close off openings in structures while allowing air to pass through.

Strengthen corners of cases and crates.

Clamp these brackets to panel edges to quickly assemble crates.

The two-piece design accommodates a wide range of panel thicknesses.

Interlock brackets to secure panels flush to flat surfaces.

Fit brackets together to assemble truck racks, gates, crates, and fences.

Machine holes and slots or weld in place.

Hold shelves in cabinets and bookcases without standards.

These standards and shelf brackets are more stable and hold heavier loads than single-slotted standards and brackets.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries.

Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Keep environments free of contaminants—with plastic bushings, there's no metal-to-metal contact that can release particles as these supports open and close. Manually control these free-moving lid supports through their full range of motion. Raise the lid until the hold-open mechanism on the support is engaged; slightly lift it again to release the hold and close the lid.

Also known as hatch springs, these supports are commonly used on hatches and other top-opening lids. Raise the lid to extend the spring, which props the lid open—an internal cable keeps the spring from overextending. Press the center of the spring to release the hold and close the lid.

Springs provide lifting assistance to raise and hold lids open—slightly lift the lid to get it started and the support will do the rest. Manually shut the lids and the supports will hold them in the closed position.

Providing constant resistance through the full range of motion, these supports hold lids open at any angle up to 70° or 90°.

Requiring less space to mount and operate, these supports are often used on small cabinets and enclosures. They gradually slow your lid's motion to prevent it from slamming open. To open lids, lower them and the support will slowly and softly do the rest. Manually shut the lids and the supports will hold them in the closed position.

These openers are often used on older casement and awning windows.

Use these openers on casement windows.

These aluminum beams provide lightweight decking and bracing.

Push the spring-loaded button to adjust the length in small increments, then pump the handle to further tighten the bar. Internal hydraulics in these bars prevent overtightening.

Press the lever down to quickly tighten these bars.

Limit wrist movement and maintain a safe, neutral position.

Give your back the extra support it needs for lifting and other strenuous activities.

Protect elbows from bumps and scratches.

Give these canes to guests and employees who need assistance walking in office and warehouse spaces.

These U-shaped supports allows access to pipe and conduit after installation.

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.

Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.

These OSHPD approved anchors and brackets support threaded-rod-mount hangers during seismic activity.

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

Add legs to these brackets and mount to a tabletop to create a folding table.

Use the rounded hook to open and close windows.

A ratchet mechanism makes these drills great for use in confined areas.