As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect. Their magnetic base lets you mount them without drilling holes in your surface. They use LED light, which is more efficient and lasts longer than other kinds of light. Rated IP67, they seal out dust and moisture even if there’s continuous airflow or they’re submerged in water for up to 30 minutes. Use them on the exterior of emergency, construction, and farm vehicles without fear of the elements damaging the lights. They don’t contain any moving parts, which helps them last a long time.

Most meet SAE J845, which is a standard for warning lights used on emergency, maintenance, and service vehicles. Class 1 have the brightest light output, so they’re used for emergency vehicles. Class 2 is common for wide-load vehicles. Class 3 is typical on forklifts used inside warehouses.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle. Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights. They’re rated IP65 for protection from dust—even in areas with continuous airflow—and low-pressure jets of water. These strobe lights use an LED bulb that will last for years. Position them quickly with the magnetic-mount base.

Plug these lights into a standard vehicle receptacle and mount using the magnetic base.

LED bulbs last longer than halogen and incandescent bulbs and provide years of maintenance-free operation.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board. Put them on the running boards of trucks and other vehicles to improve visibility without limiting ground clearance. They’re good for indoor and outdoor applications requiring resistance to water, impact, and corrosion because their built-in LEDs are sealed in plastic to keep out fluid, dust, dirt, and debris. Rated IP67, they’re dust tight even with continuous airflow and they withstand submersion in one meter of water for 30 minutes. Their LEDs last longer, are more efficient, and generate less heat than other light technologies. They have a cool light appearance, which highlights white and blue tones and is good for inspecting.

Magnetic-mount lights are useful for quick, temporary installations. Apply the included magnetic tape wherever needed, and then stick the light to the tape.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward. These lights are sealed to keep out fluid, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

All lights are rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they're built tougher than needed for machine environments.

Style B lights have a magnetic mounting base for quick, temporary installation, as well as through holes for permanent mounting. They have a tempered glass lens that's more durable than acrylic plastic.

Free your hands for other work by mounting a flashlight to a nearby surface. Flashlights are sold separately.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in styles A, B, C, and E are built-in, while style D comes with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Styles L, M, and N are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550k33 is compatible with medium-base screw-in incandescent and LED bulbs. Styles L and M have a steel guard to protect the bulb. Style N has an impact-resistant plastic lens.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Styles D and E lights have built-in LEDs that last longer, are more effiecent, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. They have an impact-resistant plastic lens to protect the LEDs.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.

Style A casts a neutral light that's consistent with the type of light often found in workspaces.

Style B casts a cool light that highlights white/blue tones, which is good for inspecting. It comes with a pistol-grip handle and a clamp attachment; swap-out the handle for the clamp when you need your hands free for other work. They cannot be sold to the regions listed due to local energy efficiency requirements.

This IP67 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights. All come with LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Style A lights come with a replaceable bulb; they do not have a lens, so bulb changes are easier. They cast a warm, yellow-tone light that’s similar to incandescent lights.

Style B lights have a durable glass lens to protect them from dust and damage. They either emit a warm or cool light appearance. Those with a warm light appearance cast a yellow tone similar to incandescent lights. They have built-in LEDs. Those with a cool light appearance highlight white/blue tones, which is good for inspecting.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces. With fluorescent or built-in LED lights, they’re energy efficient and generate little heat.

LED lights last longer, are more efficient, and generate less heat than fluorescent lights.

Lights with a neutral appearance are good for a balanced work environment.

Magnetic-mount lights don’t require drilled holes to install in metal enclosures, so there’s no risk of letting in moisture or dust that could damage your equipment.

For technical drawings and 3-D models, click on a part number.

Light is visible up to one mile.