Acetal Copolymer Sheet Stock

	Thickness Thickness

	Width Width

	Length Length

12"

24"

48"

	Color Color

	White
	Black
	Off-White

	Shape Shape


Sheet and Bar	Film

	Performance Properties Performance Properties

Electrical Insulator

High Strength

Low Thermal Expansion

	Comparable To Comparable To

	Specifications Met Specifications Met

ASTM

FDA Compliant

UL 94

	For Use With For Use With

	Clarity Clarity

Semi-Clear

Opaque

	Friction Rating Friction Rating

Very Slippery

Not Rated

	Tolerance Rating Tolerance Rating

Oversized

Standard

	Tensile Strength Tensile Strength

5,000-6,400 psi

6,280 psi

9,135-9,700 psi

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Flexural Modulus Flexural Modulus

210,000 psi

340,000-400,000 psi

	Impact Strength Rating Impact Strength Rating

Poor

Good

	Impact Strength Impact Strength

1-1.5 ft.-lbs./in.

1.5 ft.-lbs./in.

3.66 ft.-lbs./in.

	Dielectric Strength Dielectric Strength

415-500 V/mil

500 V/mil

Not Rated

	Electrical Insulation Rating Electrical Insulation Rating

Good

Excellent

Not Rated

	Water Absorption Rating Water Absorption Rating

Good

Not Rated

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Density Density

0.048 lbs./cu. in.

0.050 lbs./cu. in.

0.051 lbs./cu. in.

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

306 Products

About Plastic

Color: White or Black
Temperature Range: -20° to 180° F
Tensile Strength: 9,135-9,700 psi (Good)
Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
Hardness: Rockwell R120 (Hard)
For Use Outdoors: No
Specifications Met: ASTM D6100, FDA Compliant 21 CFR 177.2470

An economical alternative to Delrin® acetal resin, these acetal copolymer sheets and bars offer the same naturally slippery surface and similar wear resistance. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Use them for parts that require precision, such as gears, bearings, and bushings.

For technical drawings and 3-D models, click on a part number.

Sheets

		White		Black
Thick.	Thick. Tolerance		Each		Each
6" × 6"
3/16"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/2"	-0.016" to 0.025"	00000000	00000	00000000	00000
5/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
1"	-0.016" to 0.025"	00000000	00000	00000000	00000
1 1/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
1 1/2"	-0.016" to 0.025"	00000000	00000	00000000	00000
1 3/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
2"	-0.016" to 0.025"	00000000	000000	00000000	000000
2 1/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
2 1/2"	-0.016" to 0.025"	00000000	00000	00000000	00000
3"	-0.016" to 0.025"	00000000	00000	00000000	000000
4"	0" to 0.125"	00000000	000000	00000000	000000
12" × 12"
1/32"	-0.009" to 0.009"	00000000	0000	00000000	0000
3/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
1/16"	-0.009" to 0.009"	00000000	0000	00000000	00000
5/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
7/64"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/16"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/2"	-0.016" to 0.025"	00000000	00000	00000000	00000
5/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
1"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
2"	-0.016" to 0.025"	00000000	000000	00000000	000000
2 1/4"	-0.016" to 0.025"	0000000	000000	00000000	000000
2 1/2"	-0.016" to 0.025"	0000000	000000	00000000	000000
3"	-0.016" to 0.025"	0000000	000000	00000000	000000
4"	0" to 0.125"	0000000	000000	00000000	000000
12" × 24"
1/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
1/16"	-0.009" to 0.009"	00000000	00000	00000000	00000
5/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
7/64"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/16"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/4"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
5/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
2"	-0.016" to 0.025"	00000000	000000	00000000	000000
2 1/4"	-0.016" to 0.025"	0000000	000000	00000000	000000
2 1/2"	-0.016" to 0.025"	0000000	000000	00000000	000000
3"	-0.016" to 0.025"	0000000	000000	00000000	000000
4"	0" to 0.125"	0000000	000000	00000000	000000
12" × 48"
1/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
1/16"	-0.009" to 0.009"	00000000	00000	00000000	00000
5/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
7/64"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/16"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
5/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
2"	-0.016" to 0.025"	00000000	000000	00000000	000000
2 1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
2 1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
3"	-0.016" to 0.025"	00000000	000000	00000000	00000000
4"	0" to 0.125"	00000000	00000000	00000000	00000000
24" × 24"
1/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
1/16"	-0.009" to 0.009"	00000000	00000	00000000	00000
5/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
7/64"	-0.016" to 0.025"	00000000	00000	00000000	00000
1/8"	-0.016" to 0.025"	00000000	00000	00000000	00000
3/16"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
5/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
2"	-0.016" to 0.025"	00000000	000000	00000000	000000
2 1/4"	-0.016" to 0.025"	0000000	000000	00000000	000000
2 1/2"	-0.016" to 0.025"	0000000	000000	00000000	000000
3"	-0.016" to 0.025"	0000000	000000	00000000	00000000
4"	0" to 0.125"	0000000	00000000	00000000	00000000
24" × 48"
1/32"	-0.009" to 0.009"	00000000	00000	00000000	00000
3/64"	-0.009" to 0.009"	00000000	00000	00000000	00000
1/16"	-0.009" to 0.009"	00000000	00000	00000000	00000
5/64"	-0.009" to 0.009"	00000000	00000	00000000	000000
3/32"	-0.009" to 0.009"	00000000	000000	00000000	000000
7/64"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/16"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
1/2"	-0.016" to 0.025"	00000000	000000	00000000	000000
5/8"	-0.016" to 0.025"	00000000	000000	00000000	000000
3/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/4"	-0.016" to 0.025"	00000000	000000	00000000	000000
1 1/2"	-0.016" to 0.025"	00000000	000000	00000000	00000000
1 3/4"	-0.016" to 0.025"	00000000	00000000	00000000	00000000
2"	-0.016" to 0.025"	00000000	00000000	00000000	00000000

Bars

		White
Wd.	Lengths, ft.		Per Ft.
1/8" Thick. (-0.005" to 0.005")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	0000
2"	1, 2, 4	00000000	0000
3"	1, 2, 4	00000000	0000
4"	1, 2, 4	00000000	0000
1/4" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	0000
1 1/2"	1, 2, 4	00000000	0000
2"	1, 2, 4	00000000	0000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000
3/8" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	0000
1 1/2"	1, 2, 4	00000000	0000
2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000
1/2" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	0000
1 1/2"	1, 2, 4	00000000	0000
2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000
3/4" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	0000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000
1" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	0000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000
1 1/2" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000
2" Thick. (0" to 0.05")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	00000

Wear-Resistant Easy-to-Machine Acetal Film

Color: Semi-Clear White or Opaque Black
Temperature Range: -20° to 180° F
Tensile Strength: 6,280 psi (Good)
Impact Strength: 3.66 ft.-lbs./in. (Good)
Hardness: Not Rated (Hard)
For Use Outdoors: No
Specifications Met: See Table

Protect surfaces from wear with this thin and conformable acetal copolymer film. It has a naturally slippery surface and is wear resistant. This film is matte on one side and glossy on the other.

For technical drawings and 3-D models, click on a part number.

11" × 12"
Thick.	Thick. Tolerance	Color	Specifications Met		Each
0.01"	-0.001" to 0.001"	Opaque Black	__	00000000	000000
11" × 24"
0.01"	-0.001" to 0.001"	Opaque Black	__	00000000	00000
12" × 12"
0.003"	-0.0003" to 0.0003"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	0000000	00000
0.005"	-0.0005" to 0.0005"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	0000000	00000
0.01"	-0.001" to 0.001"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	0000000	00000
0.02"	-0.002" to 0.002"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	0000000	00000
12" × 24"
0.003"	-0.0003" to 0.0003"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	00000000	00000
0.005"	-0.0005" to 0.0005"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	00000000	00000
0.01"	-0.001" to 0.001"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	00000000	00000
13" × 12"
0.02"	-0.002" to 0.002"	Opaque Black	__	00000000	00000
24" × 24"
0.003"	-0.0003" to 0.0003"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	00000000	00000
24" × 48"
0.003"	-0.0003" to 0.0003"	Semi-Clear White	FDA Compliant 21 CFR 177.2470	00000000	000000

Antistatic Wear-Resistant Easy-to-Machine Acetal Sheets

Color: Off-White
Temperature Range: -20° to 180° F
Tensile Strength: 5,000-6,400 psi (Good)
Impact Strength: 1.5 ft.-lbs./in. (Poor)
Hardness: Rockwell R110 (Hard)
For Use Outdoors: No
Specifications Met: UL 94 HB

In addition to having a naturally slippery, wear-resistant surface, these sheets prevent the buildup of static charges. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. They’re also excellent electrical insulators. Use them for conveyor components and other moving parts where static is a concern.

For technical drawings and 3-D models, click on a part number.

6" × 6"
Thick.	Thick. Tolerance	Surface Resistivity		Each
1/4"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
3/8"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	00000
1/2"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	00000
12" × 12"
1/4"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
3/8"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
1/2"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
12" × 24"
1/4"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
3/8"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
1/2"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
24" × 48"
1/4"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	000000
3/8"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	00000000
1/2"	0" to 0.025"	10¹⁰ ohms/sq.	0000000	00000000

Email Us

About Plastic

Wear-Resistant Easy-to-Machine Acetal Sheets and Bars

Wear-Resistant Easy-to-Machine Acetal Film

Antistatic Wear-Resistant Easy-to-Machine Acetal Sheets