Container Type Container Type | Show |
---|
|
Container Type Container Type | Hide |
---|
For Use On For Use On |
---|
Manufacturer Model Number Manufacturer Model Number |
---|
Begins to Harden Begins to Harden |
---|
|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Clarity Clarity |
---|
|
Container Size Container Size |
---|
Shear Strength Shear Strength |
---|
|
Formulation Formulation |
---|
|
Cure Type Cure Type |
---|
|
Mixing Required Mixing Required |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
Consistency Consistency |
---|
|
Elongation Elongation |
---|
|
More
More
Use these glues for general purpose bonding and repairs.
3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).
Mfr. Model No. | Container Size, oz. | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | Each | |
24 | 13.8 | 30 sec. | 24 hrs. | 170° | Orange | Foam | CA | 00000000 | 00000 |
27 | 13 | 15 sec. | 24 hrs. | 140° | Clear | Fabric, Metal, Plastic, Rubber, Wood | CA | 00000000 | 0000 |
Shipping-Mate Case Sealing | 17.3 | 30 sec. | 24 hrs. | 160° | Clear | Cardboard | CA | 0000000 | 00000 |
Shipping-Mate Palletizing | 16.8 | 60 sec. | 24 hrs. | 110° | Clear | Cardboard | CA | 0000000 | 00000 |
Mfr. Model No. | Container Size, oz. | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
24 | 13.8 | 30 sec. | 24 hrs. | 170° | Orange | Foam | CA | 12 | 00000000 | 000000 |
27 | 13 | 15 sec. | 24 hrs. | 140° | Clear | Fabric, Metal, Plastic, Rubber, Wood | CA | 12 | 00000000 | 00000 |
Shipping-Mate Case Sealing | 17.3 | 30 sec. | 24 hrs. | 160° | Clear | Cardboard | CA | 12 | 0000000 | 000000 |
Shipping-Mate Palletizing | 16.8 | 60 sec. | 24 hrs. | 110° | Clear | Cardboard | CA | 12 | 0000000 | 000000 |
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | |||||||||||||
20 | 13.8 | 21 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 300 | Not Rated to 210° | Clear | Wood | CA | 00000000 | 00000 | 00000 |
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Clear | Fabric, Foam | CA | 0000000 | 00000 | 00000 |
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | CA | 0000000 | 00000 | 00000 |
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | Yes | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | CA | 00000000 | 00000 | 00000 |
74CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Clear | Fabric, Foam | __ | 0000000 | 00000 | 00000 |
74CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | __ | 0000000 | 00000 | 00000 |
77 | 13.44 | 21 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 0000 | 0000 |
77 | 16.8 | 26 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | White | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 00000 | 00000 |
77CA | 18 | 28 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | __ | 0000000 | 00000 | 00000 |
78 | 17.9 | 28 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 300 | Not Rated to 180° | White | Foam | CA | 0000000 | 00000 | 00000 |
78 | 17.9 | 28 sq. ft. @ 2.5 gm/ft² | Yes | 60 sec. | 24 hrs. | 300 | Not Rated to 180° | Clear | Foam | CA | 00000000 | 00000 | 00000 |
94ET | 19.8 | 31 sq. ft. @ 2.5 gm/ft² | No | 10 min. | 24 hrs. | 300 | 0° to 210° | Clear | Ceramic, Composites, Glass, Metal, Plastic | __ | 0000000 | 00000 | 00000 |
Container Size, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength | Temp. Range | Color | For Joining | Cannot Be Sold To | Each | |
Adhesives | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
12 | 19 sq. ft. @ 2.5 gm/ft² | No | 1 sec. | 24 hrs. | Not Rated | Not Rated | Beige | Fabric, Foam, Plastic, Rubber | CA | 000000 | 00000 |
Form bonds with twice the strength of our other spray adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.
80 bonds rubber and vinyl.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | |||||||||||||
80 | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 3 min. | 24 hrs. | 600 | Not Rated to 200° | Yellow | Plastic, Rubber | CA | 0000000 | 000000 | 000000 |
90 | 12.23 | 19 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 600 | 0° to 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | CA | 0000000 | 00000 | 00000 |
90 | 17.6 | 27 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 600 | 0° to 250° | White | Ceramic, Composites, Glass, Metal, Plastic, Rubber | CA | 0000000 | 00000 | 00000 |
90 | 17.6 | 27 sq. ft. @ 2.5 gm/ft² | Yes | 60 sec. | 24 hrs. | 600 | 0° to 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | CA | 00000000 | 00000 | 00000 |
90CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 600 | 0° to 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | __ | 0000000 | 00000 | 00000 |
Container Size, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength | Temp. Range | Color | For Joining | Each | |
Adhesives | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
12 | 19 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | Not Rated | Not Rated | White | Masonry, Plastic, Rubber | 0000000 | 000000 |
For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond. The blue color shows where adhesive has been applied. They cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).
Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength | Max. Temp., ° F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | ||||||||||||
72 | 17.3 | 27 sq. ft. @ 2.5 gm/ft² | 60 sec. | 24 hrs. | Not Rated | 120° | Blue | Composites, Foam, Metal, Plastic, Rubber, Wood | CA | 0000000 | 000000 | 000000 |
Splice rubber O-rings and other gaskets with this chemical resistant adhesive. It cannot be sold to Canada due to local chemical restrictions.
Container Size, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
12 | 19 sq. ft. @ 2.5 gm/ft² | 5 sec. | 48 hrs. | 150 | -40° to 400° | Black | Ceramic, Fabric, Metal, Rubber, Wood | Canada | 000000 | 000000 |
These spray glues adhere quickly. Spray a thin, uniform coating on one surface, air dry, and then bring together to bond. They cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).
Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | ||||||||||||
76 | 18.1 | 28 sq. ft. @ 2.5 gm/ft² | 60 sec. | 24 hrs. | Not Rated | 160° | White | Metal, Plastic, Wood | CA | 0000000 | 000000 | 000000 |
Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.
Container Size, oz. | Begins to Harden | Reaches Full Strength | Shear Strength | Max. Temp., °F | Color | For Joining | Each | |
Gorilla Adhesives | ||||||||
---|---|---|---|---|---|---|---|---|
14 | 5 min. | 24 hrs. | Not Rated | 90° | Clear | Fabric, Metal | 0000000 | 00000 |
To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Drying Time | Consistency | Viscosity, cP | Color | Environment | Specifications Met | Each | |
Loctite® Primers | ||||||||||
7471 | 4.5 oz. | Aerosol Can | 30 sec. | Thin Liquid | 2 | Amber | __ | MIL-S-22473E | 00000000 | 000000 |
7649 | 0.88 oz. | Aerosol Can | 30 sec. | Thin Liquid | 2 | Green | Food Industry | MIL-S-22473E, NSF/ANSI 61 | 0000000 | 00000 |
7649 | 4.5 oz. | Aerosol Can | 30 sec. | Thin Liquid | 2 | Green | Food Industry | MIL-S-22473E, NSF/ANSI 61 | 0000000 | 00000 |
Primers | ||||||||||
__ | 4.25 oz. | Aerosol Can | 1 min. | Thin Liquid | Not Rated | Green | __ | MIL-S-22473E | 00000000 | 00000 |
Shorten the time it takes instant-bond adhesives to reach full strength. Apply these accelerators before bonding with instant-bond adhesives for strength, or after bonding to keep adhesive from turning cloudy.
Activators are required for no-mix acrylic structural adhesives to create adhesion.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Mfr. Model No. | For Loctite® Model No. | Size, oz. | Type | Consistency | Viscosity, cP | Color | Each | |
Loctite® Activators | ||||||||
7387 | 324, 325, 330, 331, 332, 334, 352, 392 | 4.5 | Aerosol Can | Thin Liquid | 1 | Amber | 0000000 | 000000 |
These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused. They cure at room temperature.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque | Color | Each | |
Medium Locking Strength | |||||||||||
Threadlockers | |||||||||||
4.5 | Aerosol Can | 10 sec. | 5 min. | -55° to 170° | 2" | Thin Liquid | 100 | Not Rated | Red | 0000000 | 000000 |
Create a slippery surface that keeps sealant from smearing or widening when smoothed. The spray coverage is about eight 10-oz. caulk cartridges. These sprays cannot be sold to California or Washington because of local chemical regulations.
Container | ||||
---|---|---|---|---|
Size, oz. | Type | Cannot Be Sold To | Each | |
2.5 | Aerosol Can | CA, WA | 0000000 | 00000 |
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Container Size, oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thickness | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
11 | 10 | 24 | 9 sq. ft. @ 2 mil | Yes | 50° to 90° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Iron, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Wood | 000000 | 00000 |
Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon. Surface fillers are clear when dry.
Match the appearance of the surface filler to your part. Satin reflects the most light and seems to shine. Matte reflects almost no light and appears dull. Eggshell reflects some light but is duller than satin.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Appearance | Size, oz. | Type | Spray Position | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Approximate Coverage @ Thick. | Max. Thick., mil | For Use Outdoors | Temp. Range, °F | Color | For Use On | Each | |
Satin | 16 | Aerosol Can | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | 0000000 | 000000 |
Matte | 16 | Aerosol Can | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | 0000000 | 00000 |
Eggshell | 16 | Aerosol Can | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | 0000000 | 00000 |
Fill cracks with these coatings to stop leaks and deaden sound. They resist rust, salt, and acid.
Container | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size, oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | For Use Outdoors | For Use On | 1-11 | 12-Up | |
1/8" | 18 | Aerosol Can | Thin Liquid | 15 | 6 | 15 sq. ft. @ 1 1/2 mil | 1/16" | 50° to 100° | Black | Yes | Steel, Iron, Wood | 0000000 | 00000 | 00000 |
Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, min. | Approximate Coverage, sq. ft. | Temp. Range, °F | Texture | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
10 | Aerosol Can | Thin Liquid | 30 | 30 | 25-50 | 40° to 90° | Orange Peel | White | Drill, Sand, Saw, Tap | No | Drywall | 0000000 | 000000 |
Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage, sq. ft. | Temp. Range, °F | Texture | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
14 | Aerosol Can | Thin Liquid | 60 | 24 | 4 | 40° to 90° | Popcorn | White | Drill, Sand, Saw, Tap | No | Drywall, Wood | 0000000 | 000000 |
Also known as conformal coatings, use these coatings to protect circuit boards from moisture.
Acrylic and acrylic lacquer coatings dry quickly. Sprayon EL2000 resists grease, oil, and alkalies.
Silicone coatings have excellent chemical resistance for use in harsh environments.
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. | Mfr. Model No. | Container Size, oz. | Touch, min. | Overall | Dielectric Strength, V/mil | Thermal Conductivity | Temp. Range, °F | Specifications Met | For Use Outdoors | For Use On | Color | Each | |
Acrylic Coatings | |||||||||||||
__ | __ | 12 | 3 | 24 hrs. | 1,000 | Not Rated | -75° to 270° | __ | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Clear | 0000000 | 000000 |
Acrylic Lacquer Coatings | |||||||||||||
Sprayon | EL2000 | 11 | 10 | 30 min. | 8,000 | Not Rated | Not Rated to 150° | MIL-TT-L-50G | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Clear | 0000000 | 0000 |
Silicone Coatings—Hard | |||||||||||||
__ | __ | 12 | 60 | 72 hrs. | 1,100 | 0.18 W/m-K | -85° to 390° | __ | Yes | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel | Clear | 0000000 | 00000 |
Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Size, oz. | Composition | Harshness | For Use On | For Removing | Primary Chemical | Each | |
Liquid | ||||||||
Aerosol Can | 11 | Solvent Based | Harsh | Aluminum, Brass, Bronze, Carpet, Ceramic, Chrome, Copper, Fabric, Fiberglass, Glass, Painted Surfaces, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl, Wood | Adhesive, Gum, Wax | Hydrotreated Light Petroleum Distillates (80-100%) | 00000000 | 00000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Type | Size, oz. | Composition | Harshness | For Use On | For Removing | Primary Chemical | Pkg. Qty. | Pkg. | |
Liquid | |||||||||
Aerosol Can | 11 | Solvent Based | Harsh | Aluminum, Brass, Bronze, Carpet, Ceramic, Chrome, Copper, Fabric, Fiberglass, Glass, Painted Surfaces, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl, Wood | Adhesive, Gum, Wax | Hydrotreated Light Petroleum Distillates (80-100%) | 6 | 000000000 | 000000 |
Quickly dissolve and remove most adhesive residue.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Manufacturer | Manufacturer Model Number | Type | Size, oz. | Composition | Harshness | For Use On | For Removing | Each | |
Liquid | |||||||||
3M | 97974 | Aerosol Can | 24 | Solvent Based | Harsh | Aluminum, Brass, Bronze, Ceramic, Chrome, Copper, Galvanized Steel, Iron, Porcelain, Stainless Steel, Steel, Stone | Adhesive | 000000000 | 000000 |
Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents. Stem is male.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Size, oz. | Composition | Harshness | For Use On | For Removing | Temp. Range, °F | Each | |
Liquid | ||||||||
Aerosol Can | 12 | Solvent Based | Harsh | Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel | Adhesive, Dirt, Grease/Oil, Tar, Wax | 32° to 300° | 00000000 | 00000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Type | Size, oz. | Composition | Harshness | For Use On | For Removing | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Liquid | |||||||||
Aerosol Can | 12 | Solvent Based | Harsh | Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel | Adhesive, Dirt, Grease/Oil, Tar, Wax | 32° to 300° | 12 | 00000000 | 000000 |
Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables.
Solvent Power, Kb | Container Size | Harshness | For Use On | For Removing | Temp. Range, °F | Dielectric Strength | Each | |
Aerosol Can—Nonflammable (Solvent Based) | ||||||||
---|---|---|---|---|---|---|---|---|
120 | 12 oz. | Moderate | Aluminum, Ceramic, Chrome, Galvanized Steel, Stainless Steel, Steel | Adhesive, Dirt, Dust, Flux, Grease/Oil | 32° to 120° | 15,000V | 0000000 | 000000 |
Solvent Power, Kb | Container Size | Harshness | For Use On | For Removing | Temp. Range, °F | Dielectric Strength | Pkg. Qty. | Pkg. | |
Aerosol Can—Nonflammable (Solvent Based) | |||||||||
---|---|---|---|---|---|---|---|---|---|
120 | 12 oz. | Moderate | Aluminum, Ceramic, Chrome, Galvanized Steel, Stainless Steel, Steel | Adhesive, Dirt, Dust, Flux, Grease/Oil | 32° to 120° | 15,000V | 12 | 00000000 | 0000000 |
For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Manufacturer Model Number | Type | Size, oz. | Composition | Harshness | For Use On | For Removing | Primary Chemical | Specifications Met | Each | |
Liquid | |||||||||||
Loctite® | 22355 | Aerosol Can | 15 | Solvent Based | Harsh | Aluminum, Ceramic, Chrome, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Rubber, Stainless Steel, Steel, Vinyl | Dirt, Grease/Oil, Wax | Hydrotreated Light Petroleum Distillates (80-90%) | NSF Registered K1 | 00000000 | 000000 |