Power Source Power Source |
---|
|
Maximum Torque Maximum Torque |
---|
|
System of Measurement System of Measurement |
---|
|
For Shaft Misalignment Type For Shaft Misalignment Type |
---|
![]() | None |
Torque Adjustability Torque Adjustability |
---|
|
Shaft Mount Type Shaft Mount Type |
---|
![]() | Set Screw |
Shaft Coupling Type Shaft Coupling Type |
---|
|
Torque-Limiting Direction Torque-Limiting Direction |
---|
|
Torque-Limiting Mechanism Torque-Limiting Mechanism |
---|
|
Construction Construction |
---|
![]() | One Piece |
Maximum Speed Maximum Speed |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Pulling Direction Pulling Direction |
---|
|
Fully Wound Capacity Fully Wound Capacity |
---|
|
Application Application |
---|
|
Often used in automated systems, these couplings are both air actuated and remotely adjustable, so you can adjust the torque setting even during operation. In the event of excess torque, they slip to protect motors and drivetrains, and then resume driving once the load has been reduced.
For technical drawings and 3-D models, click on a part number.
Keyway | Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Max. Torque | Max. Pressure, psi | Max. Speed | OD | Overall Lg. | Wd. | Dp. | Torque-Limiting Direction | Thread Size | Thread Type | Gender | Mounting Hole Thread Size | Each | |
For Round Shafts | ||||||||||||||
1/4" | 20 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/4" | 2 1/2" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 4-40 | 0000000 | 0000000 |
3/8" | 50 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/2" | 3 3/8" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 6-32 | 0000000 | 000000 |
1/2" | 100 in.-lbs. @ 100 psi | 100 | Not Rated | 2" | 3 5/8" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 6-32 | 0000000 | 000000 |
5/8" | 300 in.-lbs. @ 100 psi | 100 | Not Rated | 2 3/4" | 3 5/8" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 8-32 | 0000000 | 000000 |
For Keyed Shafts | ||||||||||||||
1/4" | 20 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/4" | 2 1/2" | 1/16" | 1/32" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 4-40 | 0000000 | 000000 |
3/8" | 50 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/2" | 3 3/8" | 3/32" | 3/64" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 6-32 | 0000000 | 000000 |
1/2" | 100 in.-lbs. @ 100 psi | 100 | Not Rated | 2" | 3 5/8" | 1/8" | 1/16" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 6-32 | 0000000 | 000000 |
5/8" | 300 in.-lbs. @ 100 psi | 100 | Not Rated | 2 3/4" | 3 5/8" | 3/16" | 3/32" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 8-32 | 0000000 | 000000 |
Often used in automated systems, these couplings are air actuated so you can adjust the torque during operation. In the event of excess torque, they slip to protect motors and drivetrains, and then resume driving once the load has been reduced. You can adjust the torque level without removing them from your shaft.
For technical drawings and 3-D models, click on a part number.
Keyway | Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Max. Torque | Max. Pressure, psi | Max. Speed | OD | Overall Lg. | Wd. | Dp. | Torque-Limiting Direction | Thread Size | Thread Type | Gender | Each | |
For Round Shafts | |||||||||||||
1/4" | 20 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/4" | 2 1/2" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 0000000 |
3/8" | 50 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/2" | 3 3/8" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
1/2" | 100 in.-lbs. @ 100 psi | 100 | Not Rated | 2" | 3 5/8" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
5/8" | 300 in.-lbs. @ 100 psi | 100 | Not Rated | 2 3/4" | 3 5/8" | __ | __ | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
For Keyed Shafts | |||||||||||||
1/4" | 20 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/4" | 2 1/2" | 1/16" | 1/32" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
3/8" | 50 in.-lbs. @ 100 psi | 100 | Not Rated | 1 1/2" | 3 3/8" | 3/32" | 3/64" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
1/2" | 100 in.-lbs. @ 100 psi | 100 | Not Rated | 2" | 3 5/8" | 1/8" | 1/16" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
5/8" | 300 in.-lbs. @ 100 psi | 100 | Not Rated | 2 3/4" | 3 5/8" | 3/16" | 3/32" | Clockwise and Counterclockwise | 10-32 | UNF | Female | 0000000 | 000000 |
These winches operate longer and require shorter breaks than standard air-powered winches. Because they run on compressed air, they give you longer operating times than electric winches. They have an automatic brake that holds the load when the motor stops. To lift, mount winches above the load, or use winches with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Inlet | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | For Max. Rope Lg., ft. | For Rope Dia. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Air Hose Included | Air Consumption @ Pressure | Gender | Thread Type | Pipe Size | Features | Each | |
30 Minutes On, 10 Minutes Off | |||||||||||||||||
750 | 500 | 40 | 125 | 1/4" | 14 3/4" | 14 5/8" | 11 7/8" | Aluminum, Steel | No | No | 100 cfm @ 90 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 0000000 | 000000000 |
1,500 | 1,000 | 40 | 170 | 1/4" | 17 1/2" | 21 1/2" | 12 1/2" | Aluminum, Steel | No | No | 100 cfm @ 90 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 0000000 | 00000000 |
Because this winch runs on compressed air, it gives you a longer operating time than electric winches. It has an automatic brake that holds the load when the motor stops. To lift, mount winch above the load, or use winch with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Inlet | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | For Max. Rope Lg., ft. | For Rope Dia. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Air Hose Included | Air Consumption @ Pressure | Gender | Thread Type | Pipe Size | Features | Each | |
15 Minutes On, 45 Minutes Off | |||||||||||||||||
2,000 | 1,200 | 13 | 90 | 5/16" | 8 7/8" | 14 3/8" | 15" | Aluminum, Steel | No | No | 80 cfm @ 100 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 00000000 | 000000000 |