Aluminum Barbed Cam-and-Groove Hose Couplings

Search Results

	Connection Style Connection Style

Barbed

Cam-and-Groove

	Coupling Size Coupling Size

	Cam-and-Groove Component Cam-and-Groove Component


Socket	Plug

	For Hose ID For Hose ID

	Shape Shape


Straight	90° Elbow

	Gender Gender

Male

Female

	For Use With For Use With

	For Hose Material For Hose Material

Plastic

Rubber

	Compatible With Compatible With

Andrews Cam-and-Groove

Dixon Cam-and-Groove

Ever-Tite Cam-and-Groove

PT Coupling Cam-and-
Groove

	Maximum Pressure Maximum Pressure

	Length Length

	Lever Material Lever Material

Stainless Steel

Brass

	Socket Locking Type Socket Locking Type

Lever

Locking Lever

	Socket ID Socket ID

	Dash Size Dash Size

	Plug OD Plug OD

View catalog pages (7)

Forward

How can we improve?

165 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.

Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Aluminum plugs and sockets are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

For technical drawings and 3-D models, click on a part number.

Straight Plugs, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Anodized Aluminum
Coupling Size	Plug OD	For Hose ID	Max. Pressure		Each
1/2	15/16"	1/2"	250 psi @ 72° F	00000000	000000
3/4	1 1/4"	1/2"	250 psi @ 72° F	00000000	0000
3/4	1 1/4"	3/4"	250 psi @ 72° F	0000000	00000
1	1 7/16"	1"	250 psi @ 72° F	0000000	00000
1 1/4	1 13/16"	1 1/4"	250 psi @ 72° F	0000000	00000
1 1/2	2 1/8"	1 1/2"	250 psi @ 72° F	0000000	00000
2	2 1/2"	1 1/2"	250 psi @ 72° F	00000000	00000
2	2 1/2"	2"	250 psi @ 72° F	0000000	00000
2 1/2	3"	2 1/2"	200 psi @ 72° F	0000000	00000
3	3 5/8"	2"	200 psi @ 72° F	00000000	00000
3	3 5/8"	3"	200 psi @ 72° F	0000000	00000
4	4 3/4"	3"	150 psi @ 72° F	00000000	00000
4	4 3/4"	4"	150 psi @ 72° F	0000000	00000
5	5 3/4"	5"	75 psi @ 72° F	00000000	000000
6	6 15/16"	6"	75 psi @ 72° F	0000000	000000

Straight Sockets with Locking Levers, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Sockets
			Levers						Replacement Gaskets			300 Series Stainless Steel Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
1	1 7/16"	1"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	000000	000000	10	0000000	00000	00000000	000000
1 1/4	1 13/16"	1 1/4"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	00000000	00000
1 1/2	2 1/8"	1 1/2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	00000000	00000
2	2 1/2"	2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	00000000	00000
2 1/2	3"	2 1/2"	2	316 Stainless Steel	Zinc-Plated Steel	200 psi @ 72° F	000000	00000	10	0000000	0000	00000000	00000
3	3 5/8"	3"	2	316 Stainless Steel	Zinc-Plated Steel	200 psi @ 72° F	000000	00000	10	0000000	0000	000000000	00000
4	4 3/4"	4"	2	316 Stainless Steel	Zinc-Plated Steel	150 psi @ 72° F	000000	00000	10	0000000	00000	000000000	00000
5	5 3/4"	5"	2	316 Stainless Steel	Zinc-Plated Steel	75 psi @ 72° F	000000	000000	5	0000000	00000	000000000	00000

Protective Plug for 3 Coupling Size Sockets	Each	000000
Protective Plug for 4 Coupling Size Sockets	Each	00000
Protective Plug for 2 Coupling Size Sockets	Each	00000

Straight Sockets, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
1/2	15/16"	1/2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	1/2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
3/4	1 1/4"	3/4"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	1"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	1 1/4"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1 1/2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	1 1/2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
2 1/2	3"	2 1/2"	2	316 Stainless Steel	Zinc-Plated Steel	200 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	2"	2	316 Stainless Steel	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
3	3 5/8"	3"	2	316 Stainless Steel	Zinc-Plated Steel	200 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	00000
4	4 3/4"	3"	2	316 Stainless Steel	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	00000
4	4 3/4"	4"	2	316 Stainless Steel	Zinc-Plated Steel	150 psi @ 72° F	0000000	00000	10	0000000	00000	000000000	00000
5	5 3/4"	5"	2	316 Stainless Steel	Zinc-Plated Steel	75 psi @ 72° F	00000000	000000	5	0000000	00000	000000000	00000
6	6 15/16"	6"	2	316 Stainless Steel	Zinc-Plated Steel	75 psi @ 72° F	0000000	000000	5	0000000	00000	000000	00

Protective Plug for 2 Coupling Size Sockets	Each	000000
Protective Plug for 3 Coupling Size Sockets	Each	00000
Protective Plug for 4 Coupling Size Sockets	Each	00000

90° Elbow Sockets, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
1	1 7/16"	1"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000
1 1/2	2 1/8"	1 1/2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2"	2	316 Stainless Steel	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	3"	2	316 Stainless Steel	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
4	4 3/4"	4"	2	316 Stainless Steel	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000

Protective Plug for 2 Coupling Size Sockets	Each	000000
Protective Plug for 3 Coupling Size Sockets	Each	00000
Protective Plug for 4 Coupling Size Sockets	Each	00000

Metal Cam-and-Groove Hose Couplings
for Chemicals and Petroleum

Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.

Plugs and sockets with swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.

Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Aluminum plugs and sockets are lighter in weight than 316 stainless steel plugs and sockets. They have good corrosion resistance.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

For technical drawings and 3-D models, click on a part number.

Straight Plugs, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Aluminum
Coupling Size	Plug OD	For Hose ID	Dash Size	Max. Pressure		Each
1/2	15/16"	1/2"	08	250 psi @ 72° F	000000000	00000
3/4	1 1/4"	1/2"	08	250 psi @ 72° F	000000000	0000
3/4	1 1/4"	3/4"	12	250 psi @ 72° F	00000000	0000
1	1 7/16"	3/4"	12	250 psi @ 72° F	00000000	00000
1	1 7/16"	1"	16	250 psi @ 72° F	00000000	0000
1 1/4	1 13/16"	1 1/4"	20	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	1"	16	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	1 1/2"	24	250 psi @ 72° F	00000000	00000
2	2 1/2"	1"	16	250 psi @ 72° F	000000000	00000
2	2 1/2"	1 1/2"	24	250 psi @ 72° F	00000000	00000
2	2 1/2"	2"	32	250 psi @ 72° F	00000000	00000
2 1/2	3"	2 1/2"	40	200 psi @ 72° F	00000000	00000
3	3 5/8"	2"	32	200 psi @ 72° F	00000000	00000
3	3 5/8"	3"	48	200 psi @ 72° F	00000000	00000
4	4 3/4"	3"	48	150 psi @ 72° F	00000000	00000
4	4 3/4"	4"	64	150 psi @ 72° F	00000000	00000
5	5 3/4"	5"	__	75 psi @ 72° F	000000000	00000
6	6 15/16"	6"	96	75 psi @ 72° F	00000000	00000
8	8 7/8"	8"	__	50 psi @ 72° F	000000000	000000

Straight Plugs (Continuous Swivel), Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Aluminum
Coupling Size	Plug OD	For Hose ID	Dash Size	Max. Pressure		Each
1 1/2	2 1/8"	1 1/2"	24	250 psi @ 72° F	000000000	000000
2	2 1/2"	2"	32	250 psi @ 72° F	000000000	000000
3	3 5/8"	3"	48	200 psi @ 72° F	000000000	000000

Straight Sockets with Locking Levers, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets									Replacement Gaskets			Brass Replacement Levers		300 Series Stainless Steel Replacement Levers
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000	00	000000	00
1 1/4	1 13/16"	1 1/4"	20	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	000000	000000	00
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
2 1/2	3"	2 1/2"	40	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000	000000	00
5	5 3/4"	5"	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	00000	000000	00
Aluminum with 316 Stainless Steel Levers
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	000000	00	00000000	000000
1 1/4	1 13/16"	1 1/4"	20	2	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	000000	00	00000000	00000
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	000000	00	00000000	00000
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000	00000	10	0000000	0000	000000	00	00000000	00000
2 1/2	3"	2 1/2"	40	2	Zinc-Plated Steel	200 psi @ 72° F	000000	00000	10	0000000	0000	000000	00	00000000	00000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000	00000	10	0000000	0000	000000	00	000000000	00000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	000000	00000	10	0000000	00000	000000	00	000000000	00000
5	5 3/4"	5"	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000	000000	5	0000000	00000	000000	00	000000000	00000

Straight Sockets, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Sockets									Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with Brass Levers
1/2	15/16"	1/2"	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	1/2"	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000
3/4	1 1/4"	3/4"	12	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	3/4"	12	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	1 1/4"	20	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
2 1/2	3"	2 1/2"	40	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
3	3 5/8"	2"	32	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
4	4 3/4"	3"	48	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000
5	5 3/4"	5"	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	00000	5	0000000	00000	000000000	0000
6	6 15/16"	6"	96	2	Zinc-Plated Steel	75 psi @ 72° F	00000000	000000	5	0000000	00000	000000000	00000
8	8 7/8"	8"	__	2	Zinc-Plated Steel	50 psi @ 72° F	000000000	000000	__	000000	00	000000000	00000
Aluminum with 316 Stainless Steel Levers
1/2	15/16"	1/2"	08	2	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
3/4	1 1/4"	3/4"	12	2	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	1 1/4"	20	2	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
2 1/2	3"	2 1/2"	40	2	Zinc-Plated Steel	200 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	2"	32	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	0000000	00000	10	0000000	0000	000000000	00000
4	4 3/4"	3"	48	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	00000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	0000000	00000	10	0000000	00000	000000000	00000
5	5 3/4"	5"	__	2	Zinc-Plated Steel	75 psi @ 72° F	0000000	00000	5	0000000	00000	000000000	00000
6	6 15/16"	6"	96	2	Zinc-Plated Steel	75 psi @ 72° F	0000000	000000	5	0000000	00000	000000	00

Straight Sockets (Continuous Swivel), Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets									Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with Brass Levers
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000	00
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	0000

90° Elbow Sockets, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets									Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with Brass Levers
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000
Aluminum with 316 Stainless Steel Levers
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	00000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000

Terms and Conditions and Privacy Policy

How to Identify and Measure Fittings

Metal Cam-and-Groove Hose Couplings for Water

Metal Cam-and-Groove Hose Couplingsfor Chemicals and Petroleum

Metal Cam-and-Groove Hose Couplings
for Chemicals and Petroleum