Clear All
System of Measurement System of Measurement |
|---|
|
Thickness Thickness | Show |
|---|
|
Thickness Thickness | Hide |
|---|
Finish Finish |
|---|
|
Surface Surface |
|---|
 |  |
| Serrated | Projections |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Uniform Load Rating Uniform Load Rating |
|---|
|
Drainage Opening Width Drainage Opening Width |
|---|
|
Drainage Opening Length Drainage Opening Length |
|---|
|
Mounting Hardware Included Mounting Hardware Included |
|---|
|
Weight Weight |
|---|
Uniform Load Deflection Uniform Load Deflection |
|---|
|
Shape Shape |
|---|
 | Sheet and Bar |
Performance Properties Performance Properties |
|---|
|
Comparable To Comparable To |
|---|
Backing Type Backing Type |
|---|
 | Plain |
About Plastic
More
Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Sheets, Bars, and Strips
These sheets, bars, and strips resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
White sheets, bars, and strips are FDA compliant for contact with food.
For technical drawings and 3-D models, click on a part number.
Sheets
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met:
White: ASTM D6100, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51, NSF/ANSI 61
Black: ASTM D6100
White | Black | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
12" × 12" | |||||
| 7/64" | -0.004" to 0.006" | 00000000 | 000000 | 00000000 | 000000 |
12" × 24" | |||||
| 7/64" | -0.004" to 0.006" | 00000000 | 00000 | 00000000 | 00000 |
12" × 48" | |||||
| 7/64" | -0.004" to 0.006" | 00000000 | 00000 | 00000000 | 00000 |
24" × 24" | |||||
| 7/64" | -0.004" to 0.006" | 00000000 | 00000 | 00000000 | 00000 |
24" × 48" | |||||
| 7/64" | -0.004" to 0.006" | 00000000 | 00000 | 00000000 | 00000 |
Wear-Resistant Easy-to-Machine Acetal Sheets and Bars
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 9,135-9,700 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6100, FDA Compliant 21 CFR 177.2470
An economical alternative to Delrin® acetal resin, these acetal copolymer sheets and bars offer the same naturally slippery surface and similar wear resistance. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Use them for parts that require precision, such as gears, bearings, and bushings.
For technical drawings and 3-D models, click on a part number.
Sheets
White | Black | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
12" × 12" | |||||
| 7/64" | -0.016" to 0.025" | 00000000 | 000000 | 00000000 | 000000 |
12" × 24" | |||||
| 7/64" | -0.016" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
12" × 48" | |||||
| 7/64" | -0.016" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
24" × 24" | |||||
| 7/64" | -0.016" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
24" × 48" | |||||
| 7/64" | -0.016" to 0.025" | 00000000 | 00000 | 00000000 | 00000 |
Wear-Resistant Nylon Sheets, Bars, and Strips
With a slippery surface that reduces friction, these wear-resistant nylon 6/6 sheets, bars, and strips are often machined into bearings, gears, and valve seats.
For technical drawings and 3-D models, click on a part number.
Sheets
- Color: Off-White or Black
- Temperature Range: -40° to 185° F
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
- Specifications Met:
Off-White:
7/64" Thick. and smaller: ASTM D5989, ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 HB
1/8" Thick. and larger: ASTM D5989, ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 V-2
Black: ASTM D5989, ASTM D6779
Off-White | Black | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
6" × 6" | |||||
| 7/64" | -0.016" to 0" | 00000000 | 00000 | 00000000 | 00000 |
12" × 12" | |||||
| 7/64" | -0.016" to 0" | 00000000 | 00000 | 00000000 | 00000 |
12" × 24" | |||||
| 7/64" | -0.016" to 0" | 00000000 | 00000 | 00000000 | 00000 |
12" × 48" | |||||
| 7/64" | -0.016" to 0" | 00000000 | 00000 | 00000000 | 00000 |
24" × 24" | |||||
| 7/64" | -0.016" to 0" | 00000000 | 00000 | 00000000 | 00000 |
24" × 48" | |||||
| 7/64" | -0.016" to 0" | 00000000 | 00000 | 00000000 | 00000 |
Clear Scratch- and UV-Resistant Cast Acrylic Sheets, Bars, and Cubes
These cast acrylic sheets, bars, and cubes are often fabricated into tanks, see-through barrier panels, and light fixture lenses. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material is scratch and UV resistant; it stands up to outdoor use better than polycarbonate and maintains clarity over time.
For technical drawings and 3-D models, click on a part number.
Sheets
Clear
- Color: See table
- Temperature Range: -40° to 170° F
- Tensile Strength: 10,000-11,250 psi (Good)
- Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M94-M100 (Hard)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.1010, USP Class VI
| Thick. | Thick. Tolerance | Color | Each | |
6" × 12" | ||||
|---|---|---|---|---|
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
12" × 12" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 0000 |
12" × 24" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
12" × 36" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
24" × 24" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
24" × 36" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
24" × 48" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
48" × 48" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 00000 |
48" × 96" | ||||
| 7/64" | -0.014" to 0.023" | Clear | 00000000 | 000000 |
Clear High-Strength Scratch- and UV-Resistant Acrylic
- Color: Clear
- Temperature Range: 32° to 170° F
- Tensile Strength: 8,000 psi (Good)
- Impact Strength: 0.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell M68 (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 HB
Modified for increased impact strength over other types of acrylic, these extruded acrylic sheets are often used for skylights and outdoor signs. This material is a better choice for outdoor use than polycarbonate because it is scratch and UV resistant, and it maintains clarity over time.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 7/64" | -0.003" to 0.021" | 0000000 | 00000 |
12" × 6" | |||
| 7/64" | -0.003" to 0.021" | 0000000 | 0000 |
12" × 12" | |||
| 7/64" | -0.003" to 0.021" | 0000000 | 0000 |
24" × 24" | |||
| 7/64" | -0.003" to 0.021" | 0000000 | 00000 |
48" × 24" | |||
| 7/64" | -0.003" to 0.021" | 0000000 | 00000 |
48" × 48" | |||
| 7/64" | -0.003" to 0.021" | 00000000 | 000000 |
60" × 48" | |||
| 7/64" | -0.003" to 0.021" | 00000000 | 000000 |
96" × 48" | |||
| 7/64" | -0.003" to 0.021" | 0000000 | 000000 |
Traction Drainage Floor Plates
B
C
Openings in the surface allow dust, dirt, and liquids to pass through. Use these plates to add slip resistance to floors, ramps, stairs, and dock areas.
Style B have buttonhole openings for traction without rough edges.
Style C have a serrated surface that provides superior traction for maximum slip resistance.
Drainage Opening | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. | Lg. | Thick. | Dia. | Wd. | Lg. | Mounting Hardware Included | For Use Outdoors | Each | |
Projections | ||||||||||
Steel | ||||||||||
| B | 36" | 60" | 7/64" | 1/8" | __ | __ | No | No | 0000000 | 0000000 |
| B | 36" | 10ft. | 7/64" | 1/8" | __ | __ | No | No | 0000000 | 00000000 |
Serrated | ||||||||||
Galvanized Steel | ||||||||||
| C | 8 9/16" | 60" | 7/64" | __ | 11/16" | 1 7/8" | No | Yes | 00000000 | 000000 |
| C | 10 7/8" | 60" | 7/64" | __ | 11/16" | 1 7/8" | No | Yes | 00000000 | 000000 |
| C | 24 3/4" | 60" | 7/64" | __ | 11/16" | 1 7/8" | No | Yes | 00000000 | 000000 |
| C | 24 3/4" | 12ft. | 7/64" | __ | 11/16" | 1 7/8" | No | Yes | 00000000 | 000000 |
| C | 24 3/4" | 10ft. | 7/64" | __ | 11/16" | 1 7/8" | No | Yes | 00000000 | 000000 |
Plank Grating
A
Use plank grating for platforms, stair treads, ramps, and decks. Openings allow light to pass through and water to drain. Cut grating with a band saw, hack saw, circular saw, or shears. Use Fasteners for Plank Grating to secure.
Style A are serrated to provide maximum slip resistance.
Style C have small openings to prevent items from falling through.
For technical drawings and 3-D models, click on a part number.
Style A—Serrated
A
Drainage Opening | Uniform Load | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Top Projection | Thick. | Gauge, ga. | Wd. | Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Per Ft. | |
2-, 3-, 4-, 5-, 6-, and 8-ft. Lengths | ||||||||||||
Galvanized Steel | ||||||||||||
| 4 3/4" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,751 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 000000 |
| 4 3/4" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 2,792 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 000000 | 00000 |
| 7" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,189 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,896 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 3,587 lbs./sq. ft. @ 2 ft. | 0.04" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 906 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,398 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 2,644 lbs./sq. ft. @ 2 ft. | 0.04" @ 2 ft. | No | Yes | 000000 | 00000 |
| 11 3/4" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 710 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 000000 | 00000 |
| 11 3/4" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,131 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 2,138 lbs./sq. ft. @ 2 ft. | 0.04" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 446 lbs./sq. ft. @ 2 ft. | 0.27" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 710 lbs./sq. ft. @ 2 ft. | 0.31" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 810 lbs./sq. ft. @ 2 ft. | 0.32" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 24" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 475 lbs./sq. ft. @ 2 ft. | 0.4" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 24" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 475 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000 |
Aluminum | ||||||||||||
| 4 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,794 lbs./sq. ft. @ 2 ft. | 0.09" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,169 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 897 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 725 lbs./sq. ft. @ 2 ft. | 0.06" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 514 lbs./sq. ft. @ 2 ft. | 0.16" @ 2 ft. | No | Yes | 0000000 | 00000 |
10- and 12-ft. Lengths | ||||||||||||
Galvanized Steel | ||||||||||||
| 4 3/4" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,751 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 3/4" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 2,792 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,189 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,896 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 3,587 lbs./sq. ft. @ 2 ft. | 0.04" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 906 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,398 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 2,644 lbs./sq. ft. @ 2 ft. | 0.04" @ 2 ft. | No | Yes | 000000 | 00000 |
| 11 3/4" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 710 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 1,131 lbs./sq. ft. @ 2 ft. | 0.05" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 2,138 lbs./sq. ft. @ 2 ft. | 0.04" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 1 1/2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 446 lbs./sq. ft. @ 2 ft. | 0.27" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 710 lbs./sq. ft. @ 2 ft. | 0.31" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 810 lbs./sq. ft. @ 2 ft. | 0.32" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 24" | 2" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 475 lbs./sq. ft. @ 2 ft. | 0.4" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 24" | 3" | 5/16" | 7/64" | 12 | 11/16" | 1 7/8" | 475 lbs./sq. ft. @ 2 ft. | 0.38" @ 2 ft. | No | Yes | 0000000 | 00000 |
Aluminum | ||||||||||||
| 4 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,794 lbs./sq. ft. @ 2 ft. | 0.09" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,169 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 897 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 725 lbs./sq. ft. @ 2 ft. | 0.06" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 514 lbs./sq. ft. @ 2 ft. | 0.16" @ 2 ft. | No | Yes | 0000000 | 00000 |
| Fasteners for Style A Grating (Pkg. of 20) | 000000 | Pkg. | 000000 |
Walkway Plank Grating
An integral toeboard keeps tools and parts from falling off this plank grating and meets OSHA requirement 1910.23 for elevated walkways. The serrated surface provides excellent traction and allows water to drain. Cut grating with a cutting torch, circular saw, or reciprocating saw. Use Fasteners for Plank Grating to secure.
Drainage Opening | Uniform Load | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Thick. | Gauge, ga. | Wd. | Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Specifications Met | Per Ft. | |
2-, 4-, 6-, and 8-ft. Lengths | ||||||||||||
Serrated | ||||||||||||
Galvanized Steel | ||||||||||||
| 24" | 4 1/2" | 7/64" | 12 | 11/16" | 1 7/8" | 475 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | OSHA Compliant 29 CFR 1910.23 | 0000000 | 0000000 |
10- and 12-ft. Lengths | ||||||||||||
Serrated | ||||||||||||
Galvanized Steel | ||||||||||||
| 24" | 4 1/2" | 7/64" | 12 | 11/16" | 1 7/8" | 475 lbs./sq. ft. @ 2 ft. | 0.37" @ 2 ft. | No | Yes | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000 |