Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Shape Shape |
|---|
 |  |
| Foil | Round Tube |
 | |
| Sheet and Bar |
System of Measurement System of Measurement |
|---|
|
Appearance Appearance |
|---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Certificate Certificate |
|---|
 | |
Tolerance Rating Tolerance Rating |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Hardness Hardness |
|---|
|
Yield Strength Yield Strength |
|---|
|
Temper Rating Temper Rating |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Elongation Elongation |
|---|
|
Fabrication Fabrication |
|---|
|
About Aluminum
More
Easy-to-Weld 5052 Aluminum Tubes
- Yield Strength: 10,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Specifications Met: ASTM B210
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| OD | OD Tolerance | ID | ID Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.035" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | -0.004" to 0.004" | 0.180" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.305" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.680" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.930" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.049" Wall Thick. (-0.003" to 0.003" Tolerance) | ||||||||||
| 1/4" | -0.004" to 0.004" | 0.152" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.277" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1/2" | -0.004" to 0.004" | 0.402" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.652" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.902" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.065" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||||
| 1/2" | -0.004" to 0.004" | 0.370" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 5/8" | -0.004" to 0.004" | 0.495" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.870" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
Easy-to-Weld 5052 Aluminum Sheets and Bars
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Bars are saw cut to the widths and lengths listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Yield Strength: 23,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | 48" × 48" | |
| 0.032" | -0.003" to 0.003" | -300° to 300° | 000000000 | ||||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.062" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.100" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 000000000 | ||||||||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | ||||||||||
| 1/4" | -0.015" to 0.015" | -300° to 300° | 000000000 | ||||||||||
| 3/8" | -0.02" to 0.02" | -300° to 300° | 000000000 | ||||||||||
| 1/2" | -0.027" to 0.027" | -300° to 300° | 000000000 |
- Yield Strength: 28,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Width | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | -300° to 300° | 000000 | |||||
| 3/4" | -300° to 300° | 000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
1/4" Thick. (-0.015" to 0.015" Tolerance) | |||||||
| 1/2" | -300° to 300° | 0000000 | |||||
| 3/4" | -300° to 300° | 0000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
Polished Easy-to-Weld 5052 Aluminum Sheets and Bars
- Yield Strength: 20,000 psi
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective, peel-off film. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | |
Brushed | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Mirror-Like | |||||||||||
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||