Unlike other aluminum tubing, this tubing is rigid and will not bend.

Commonly used in marine applications, this tubing contains magnesium for extra corrosion resistance.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Connect claw-clamp high-vacuum fittings for an airtight seal.

Typically used with thick-wall aluminum unthreaded pipe fittings.

Typically used with low-pressure aluminum threaded pipe fittings.

When your process requires hot water, reach for this rubber hose.

Hose is made of lightweight, nonmarring PVC.

With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.

Also known as pin-rack hose, this hose can be folded to fit in a rack.

Two heavy duty polyester covers protect this hose.

Form elbows and bends with this hose and it will hold its shape without support.

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Polished on the outside to a #8 reflective, mirror-like finish, these tubes have no visible grain lines.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

These tubes are sized so that each tube fits into the next larger size.

Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Connect T‐slotted rails and reinforce joints for structural stability.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add panels to T-slotted framing to create machine guards and strip doors.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Thick construction makes this framing strong and sturdy.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Create posts of varying lengths.

Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations.

Combine these general purpose shafts with a linear bearing and shaft support to create a basic linear motion system.