Forged One-Piece Wire Rope Clamps—Not for Lifting
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Clamp | ||||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Lg. | Wd. | Fabrication | Required Torque, ft.-lbs. | Capacity | Specifications Met | Each | |
Zinc-Plated Steel | |||||||||
1/8" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 1/16" | 5/8" | Forged | 35 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 000000 |
1/4" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 1/2" | 1" | Forged | 145 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
5/16" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 1 15/16" | 1 1/4" | Forged | 225 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |
3/8" | 6 × 19 IWRC 7 × 19 IWRC 7 × 19 Strand Core | 2 3/16" | 1 7/16" | Forged | 325 | 90% of the Rope's Capacity | Fed. Spec. FF-C-450, MS16843 | 0000000 | 00000 |