Message Type Message Type |
---|
![]() | ![]() |
Tracking and Inspection | Blank |
![]() | ![]() |
Made to Order | Identification |
![]() | |
Accident Prevention |
Message Message |
---|
Language Language |
---|
|
Flash Frequency Flash Frequency |
---|
|
Message Color Message Color |
---|
Environment Environment |
---|
|
Timing Interval Timing Interval |
---|
|
Light Color Light Color |
---|
|
|
Tag Holder Type Tag Holder Type |
---|
![]() | ![]() |
Cable Tie | Notched Loop |
Header Color Header Color |
---|
|
Finish Finish |
---|
|
Mount these indicators to your equipment, and their bright LED will catch your attention when it’s time for maintenance or inspection. They’re commonly used to keep track of maintenance on production lines and HVAC systems, or paired with inspection tags on fire extinguishers and eye wash stations.
When first set, these indicators flash a dark green and then a light green color every two minutes. As a scheduled inspection approaches, they flash a yellow light every 10 seconds. And when an inspection is past due, they blink red every two seconds. Reset indicators to start the countdown again. They meet IP65, so they seal out dust and low-pressure washdowns.
Timing Cycle | Resettable | Dia. | Ht. | Thick. | Batteries Included | Mounting Fasteners Included | Environmental Rating | Each | |
Screw On, Hang On, Tie On | |||||||||
---|---|---|---|---|---|---|---|---|---|
7 Day | Yes | 2 1/2" | 3 5/8" | 7/8" | Yes | Yes | IP65 | 000000 | 000000 |
30 Day | Yes | 2 1/2" | 3 5/8" | 7/8" | Yes | Yes | IP65 | 000000 | 00000 |
90 Day | Yes | 2 1/2" | 3 5/8" | 7/8" | Yes | Yes | IP65 | 000000 | 00000 |
180 Day | Yes | 2 1/2" | 3 5/8" | 7/8" | Yes | Yes | IP65 | 000000 | 00000 |
365 Day | Yes | 2 1/2" | 3 5/8" | 7/8" | Yes | Yes | IP65 | 000000 | 00000 |
Indicate whether cylinders are full or empty. The plastic laminate protects these tags from moisture and wear. They have the same message printed on both sides. Attach them using an included cable tie.
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Material | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Empty Cylinder—Do Not Use (English) | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 000000 |
Empty Cylinder Do Not Use (English/Spanish) | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 00000 |
Full Cylinder—Ready for Use (English) | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 00000 |
Full Cylinder Ready For Use (English/Spanish) | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 00000 |
Tags are laminated in plastic or aluminum so they hold up outdoors.
Plastic-laminated tags resist moisture and are almost impossible to tear. Write on them using a pencil, pen, or permanent marker. Attach them using the included cable tie.
Write on aluminum-laminated tags with a pen, pencil, or sharp object to create impressions that are visible, even if the ink wears away.
Tags with a notched-loop tag holder attach to items by looping around them—no string, chain, or cable tie required. Their long handle also serves as a clasp.
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||
---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Material | Lg. | Pkg. Qty. | Pkg. | |
Vinyl Plastic with Notched-Loop Tag Holder | ||||||||
Standard | 5 15/16" | 3 1/4" | 0.015" | Vinyl Plastic | 5 1/4" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 2 1/2" | 1 7/8" | 0.03" | Metal | 1/2" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 00000 |
Vinyl Plastic with Notched-Loop Tag Holder | ||||||||||
Standard | 5 15/16" | 3 1/4" | 0.015" | __ | __ | Vinyl Plastic | 5 1/4" | 10 | 00000000 | 00000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Visibility | Ht. | Wd. | Thick. | Hole Dia. | Pkg. Qty. | Pkg. | |
Aluminum-Laminated Cardstock | |||||||
---|---|---|---|---|---|---|---|
Standard | 5" | 3" | 0.02" | 3/16" | 10 | 00000000 | 000000 |
Visibility | Ht. | Wd. | Thick. | Hole Dia. | Pkg. Qty. | Pkg. | |
Aluminum-Laminated Cardstock | |||||||
---|---|---|---|---|---|---|---|
Standard | 5" | 3" | 0.02" | 3/16" | 10 | 00000000 | 000000 |
Visibility | Ht. | Wd. | Thick. | Hole Dia. | Pkg. Qty. | Pkg. | |
Aluminum-Laminated Cardstock | |||||||
---|---|---|---|---|---|---|---|
Standard | 5" | 3" | 0.02" | 3/16" | 10 | 00000000 | 000000 |
Tag Holder | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | |||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | NFPA 10 | 10 | 0000000 | 000000 |
Vinyl Plastic with Notched-Loop Tag Holder | |||||||||||
Standard | 5 15/16" | 3 1/4" | 0.015" | __ | __ | Vinyl Plastic | 5 1/4" | __ | 10 | 00000000 | 00000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Visibility | Ht. | Wd. | Thick. | Hole Dia. | Pkg. Qty. | Pkg. | |
Aluminum-Laminated Cardstock | |||||||
---|---|---|---|---|---|---|---|
Standard | 4" | 2" | 0.02" | 3/16" | 25 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 2 1/2" | 1 7/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 2 1/2" | 1 7/8" | 0.03" | Metal | 1/2" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 00000 |
Vinyl Plastic with Notched-Loop Tag Holder | ||||||||||
Standard | 5 15/16" | 3 1/4" | 0.015" | __ | __ | Vinyl Plastic | 5 1/4" | 10 | 00000000 | 00000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Visibility | Ht. | Wd. | Thick. | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Plastic-Laminated Vinyl Plastic with Cable Tie Tag Holder | ||||||||||
Standard | 5 5/8" | 3 1/8" | 0.03" | Metal | 3/8" | Nylon Plastic | 7" | 10 | 00000000 | 000000 |
Visibility | Ht. | Wd. | Thick. | Hole Dia. | Pkg. Qty. | Pkg. | |
Aluminum-Laminated Cardstock | |||||||
---|---|---|---|---|---|---|---|
Standard | 5" | 3" | 0.02" | 3/16" | 10 | 00000000 | 000000 |
Track the location of equipment, tools, and other material around your facility. These tags use bluetooth to communicate with an app on your smartphone—up to 100 ft. away. Update tag inventory and record information such as service reminders for each tag using the app or website. Made of polycarbonate, these tags withstand impact and weathering. Tie, screw, or glue onto material.
Tags are laminated in plastic so they hold up outdoors. Hang them on equipment in need of repairs using an included cable tie. Write on them using a pencil or permanent marker.
Tag Holder | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Material | Grommet Material | Hole Dia. | Material | Lg. | Pkg. Qty. | Pkg. | |
Maintenance Order—Electrical Repairs Required | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 000000 |
Maintenance Order—Mechanical Repairs Required | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 00000 |
Maintenance Order—Pipefitting Repairs Required | ||||||||||
5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | 10 | 0000000 | 00000 |
The messages on these labels clearly display the status of materials. Write additional information in the spaces provided with a permanent marker.
Tyvek labels are water and tear resistant.
Write information on these labels with a permanent marker and then seal them with the laminating flap to protect the message from weather and tampering. The printed messages clearly display the status of materials.
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
Flap | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Material | Color | Pkg. Qty. | Pkg. | |
5/8" | 1 1/2" | 0.005" | Adhesive Back | Vinyl Plastic | Plastic | Clear | 70 | 0000000 | 000000 |
These labels cannot be removed without visible evidence of tampering—they rip and leave residue when peeled. Write on them to label equipment with a company name and address or ID number.
Ht. | Wd. | Thick. | Color | Message Color | Mount Type | Material | Pkg. Qty. | Pkg. | |
3/4" | 1 1/2" | 0.002" | Black | White | Adhesive Back | Vinyl Plastic | 10 | 000000000 | 00000 |
Write on these labels to mark equipment with a company name and address or ID number.
Ht. | Wd. | Thick. | Mount Type | Material | Pkg. Qty. | Pkg. | |
3/4" | 1 1/2" | 0.002" | Adhesive Back | Plastic-Laminated Aluminum | 30 | 00000000 | 000000 |
Specify a message to identify equipment and materials. For English/Spanish labels, please specify the message in both languages.
For polyester, please specify four lines maximum (up to 15 characters per line, including spaces). Minimum order is 50.
Protect messages from moisture and smudging with the clear laminating flap. Write on these labels with a permanent marker.
Flap | White | |||||||
---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Thick. | Mount Type | Material | Color | Pkg. Qty. | Pkg. | |
Vinyl Plastic | ||||||||
5/8" | 1 1/2" | 0.005" | Adhesive Back | Plastic | Clear | 70 | 0000000 | 000000 |
A layer of aluminum foil in these labels will set off metal detectors if they fall into your food-processing line. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for preventing contaminated food from leaving the facility. Write on them with a marker to label tools and other equipment in your facility; they’re bright yellow to help you identify items.
They’re made of FDA-compliant adhesive and paper, so they’re safe for use with food in packaging, transportation, and storage applications.
Ht. | Wd. | Thick. | Color | Mount Type | Material | Specifications Met | Pkg. Qty. | Pkg. | |
2 1/4" | 5" | 0.007" | Yellow | Adhesive Back | Aluminum, Paper | FDA Compliant 21 CFR 175.105, FDA Compliant 21 CFR 177.1520 | 100 | 0000000 | 000000 |