Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Bolts are spring-loaded to stay latched until you activate the pull.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

The mounting screws on these padlockable latches are concealed to prevent tampering.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

Choose these locks if you need locks that each open with a different key.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

These latches are reversible for right- and left-hand mounting.

Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.