The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups.

Holders with fine-adjustment arm give you more precise control over the arm position.

The magnetic base has a flat bottom for mounting on flat metal surfaces and a magnetic release switch for easy setups.

Fine-adjustment attachment (sold separately) can be installed between the upright post and the base to give you more precise control over positioning.

The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the arm.

Adjust the flexible arm to nearly any position. These holders have a ball-and-socket segmented arm that locks in place with a lever. The magnetic base has a release switch for easy setups.

Holders with V-grooved base can be mounted on both curved and flat surfaces.

Holders with fine-adjustment base or clamp give you more precise control over positioning.

The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. Use the fine-adjustment knob to precisely position the arm.

A flexible ball-and-socket segmented arm adjusts to nearly any position and locks in place with a lever. The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. It has a magnetic-release switch for easy setups.

These holders come with a calibration certificate traceable to NIST states that the granite base has passed a test for surface accuracy. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.

Holders with jointed arm have a fine-adjustment knob for precise positioning.

Commonly used on workbenches, these stands have a heavy granite base for stability. They hold indicators in place for taking accurate readings.

A heavy cast iron base adds stability. These stands hold indicators in place for taking accurate readings. A fine-adjustment knob gives you precise control over the arm position.

Serrated anvils are often used when measuring oily parts—oil drips down into the serrations so the indicator has more direct contact with the part it’s measuring.

Position the arm by adjusting joints at the top, middle, and bottom. A vacuum base provides stability on granite plates and other nonmagnetic surfaces. Use the fine-adjustment knob on the clamp for precise positioning

For technical drawings and 3-D models, click on a part number.

A granite base stabilizes these indicators. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.

Indicators have a continuous dial numbered clockwise around the face for taking direct measurements. Rotate the dial face for viewing at multiple angles. All come with calibration certificates traceable to NIST that state the indicator and the granite base have passed a test for accuracy. They have jeweled bearings that are highly sensitive and wear resistant for a long service life.

Holders with jointed arm have a fine-adjustment knob for precise positioning of the indicator.

The magnetic base has a V-grooved bottom to provide a solid mount on flat and curved metal surfaces. It also has a magnetic release switch for easy setups.

Indicator has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.

Place the magnetic base on metal surfaces for a solid mount. The base has a V-grooved bottom for mounting on flat and curved surfaces and magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.

Indicator has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles.

For a solid mount on metal surfaces, this indicator comes with a magnetic base. It has a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects.

A magnetic base provides a solid mount on metal surfaces. It has a V-grooved bottom for mounting on flat and curved surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob for precise positioning of the holder’s arm.

The indicator has a spring-loaded plunger that retracts and extends to measure objects. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off. A zero-set button lets you start measuring at any point, and a go/no-go operation indicates when measurements fall outside your set tolerance.

Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on flat and curved metal surfaces and a magnetic release switch for easy setups. Use the fine-adjustment knob on the holder’s clamp for precise positioning of the indicator.

Also known as a test indicator, the indicator has a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. It has jeweled bearings for high sensitivity, wear resistance, and a long service life. Rotate the dial face for viewing at multiple angles.