Battery Maintainers | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

58 Products

About Battery Disposal

After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.

Style B have mounting holes to attach them directly to mobile equipment, such as lift tables and floor scrubbers—no need to lug your equipment to a charger to power it.

Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.

Chargers that cannot be sold to the regions listed are restricted by local energy efficiency regulations or product labeling requirements.

Style A—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

Charge Status Indicator and Reverse-Polarity Protection
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	Cannot Be Sold To		Each
24	80-150	10	Terminal Clamp (8 ft.)	Three Prong	7	120V AC	6 1/2"	7"	8"	CA, OR	000000	0000000
24	150-350	25	Terminal Clamp (8 ft.)	Three Prong	7	120V AC	8 1/2"	10"	9 1/2"	CA	000000	000000

Style A—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and For Wet-Cell Lead Acid Batteries

Charge Status Indicator and Reverse-Polarity Protection
For Lithium Type	For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Battery Connection Current	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	Cannot Be Sold To		Each
Lithium Iron Phosphate (LiFePO4)	12/24	80-150	10	Terminal Clamp (8 ft.)	__	Three Prong	8	120V AC	6 1/2"	7"	8"	CA, OR	0000000	0000000
Lithium Iron Phosphate (LiFePO4)	12/24	150-350	25	Terminal Clamp (8 ft.)	__	Three Prong	8	120V AC	6 1/2"	7"	8"	CA	0000000	000000
Lithium Iron Phosphate (LiFePO4)	36	150-350	25	North American Style Connector (8 ft.)	175A	Three Prong	8	120V AC	8 1/2"	10"	9 1/2"	CA, OR	0000000	000000
Lithium Iron Phosphate (LiFePO4)	48	150-350	25	North American Style Connector (8 ft.)	175A	Three Prong	8	120V AC	8 1/2"	10"	9 1/2"	CA, OR	0000000	000000

Style B—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and For Wet-Cell Lead Acid Batteries

											Mounting Holes
For Lithium Type	For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	No. of	Dia.	Mounting Fasteners Included	Cannot Be Sold To		Each
Charge Status Indicator and Reverse-Polarity Protection
Lithium Iron Phosphate (LiFePO4)	48	150-350	25	3/8" Ring Terminal (8 ft.)	Three Prong	8	120V AC	6"	9"	8"	4	3/8"	No	CA, OR	0000000	0000000

Style C—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

Charge Status Indicator and Reverse-Polarity Protection
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
6/12	1.2-200	1.25	Terminal Clamp (18"), 5/16" ID Ring Terminal (18"), Two-Pin SAE Connector (6 ft.)	Two Prong	6	120V AC	2"	7"	3 3/4"	00000000	000000

Style D—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

Charge Status Indicator and Reverse-Polarity Protection
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
6/12	12-68	2, 10	Terminal Clamp (7 ft.)	Two Prong	7	120V AC	7 3/4"	10 1/2"	3 3/4"	000000	0000000
12	13-100	20	Terminal Clamp (6 ft.)	Three Prong	6	120V AC	11"	8"	6"	000000	000000

Style D—For Wet-Cell Lead Acid Batteries

Charge Status Indicator and Reverse-Polarity Protection
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
6/12	12-59	3, 6	Terminal Clamp (7 ft.)	Two Prong	7	120V AC	7 3/8"	10 1/4"	3 1/4"	0000000	000000

Style E—For K2 Energy Lithium Ion (Li-Ion) Batteries

Charge Status Indicator
Charger No.	For Battery No.	For Lithium Type	For Battery Voltage	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	Cannot Be Sold To		Each
K2C12V4A03	K2B12V7EB, K2B12V10EB, K2B12V19EB, K2B12VG27-2, K2B12VG27-3, K2B12VU1-1	Lithium Iron Phosphate (LiFePO4)	12	4	Sheathed Alligator Clip (4 ft.)	Two Prong	4	120V AC	1 3/16"	5 1/2"	2 3/8"	CA	000000	000000
K2C24V2A03	K2B24V10EB	Lithium Iron Phosphate (LiFePO4)	24	2	Sheathed Alligator Clip (4 ft.)	Two Prong	4	120V AC	1 3/16"	5 1/2"	2 3/8"	CA	000000	00000

Water-Resistant Chargers for Large-Cell Batteries

Charge batteries even in wet environments—a sealed housing keeps water out. They have reverse-polarity protection to prevent sparks and short circuits if the ring terminals touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.

When used with lithium batteries, Style D chargers must match the battery’s lithium type.

Chargers that cannot be sold to California and Oregon are restricted by local energy efficiency regulations.

Style A—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	Mounting Hole Dia.	Mounting Fasteners Included		Each
12/24	5-100	2.5, 5	Two-Pin SAE Connector (4 ft.), 5/16" ID Ring Terminal (18")	Three Prong	6	120V AC	5 1/8"	8 7/8"	2"	3/8"	No	00000000	0000000

Style B—For Wet-Cell Lead Acid Batteries

										Mounting Holes
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	No. of	Dia.	Mounting Fasteners Included	Cannot Be Sold To		Each
12	150-350	25	3/8" ID Ring Terminal (6 ft.)	Three Prong	2	120V AC	6 1/2"	6"	9"	4	3/8"	No	CA, OR	0000000	0000000
24	150-350	25	3/8" ID Ring Terminal (6 ft.)	Three Prong	2	120V AC	6 1/2"	6"	9"	4	3/8"	No	CA	0000000	000000

Style C—For Wet-Cell Lead Acid Batteries

For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
12	72	6	Terminal Clamp (4 ft.)	Three Prong	6	120V AC	3 1/2"	5"	2 3/8"	0000000	0000000

Style D—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and Wet-Cell Lead Acid Batteries

											Mounting Holes
For Lithium Type	For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.	No. of	Dia.	Mounting Fasteners Included		Each
Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)	24	55-425	40	3/8" ID Ring Terminal (6 ft.)	Three Prong	6	120V AC	3 7/8"	8 1/2"	12"	4	5/16"	No	0000000	0000000
Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)	36	55-425	26	3/8" ID Ring Terminal (6 ft.)	Three Prong	6	120V AC	3 7/8"	8 1/2"	12"	4	5/16"	No	0000000	000000
Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)	48	55-425	20	3/8" ID Ring Terminal (6 ft.)	Three Prong	6	120V AC	3 7/8"	8 1/2"	12"	4	5/16"	No	0000000	000000

Hand-Held Charger/Starters for Large-Cell Batteries

Small enough to carry, these charger/starters provide a 125-amp starting current. They have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.

For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Starting Current, A	Battery Connection Type (Cord Lg.)	Features	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
6/12	12-150	6/15-40	125	Terminal Clamp (12 ft.)	Charge Status Indicator, Reverse-Polarity Protection	Two Prong	6	120V AC	13"	10 1/2"	11 5/8"	0000000	0000000

Charger/Starters for Large-Cell Batteries

Wheel these charger/starters to batteries that need maintenance. They provide higher starting currents than Hand-Held Charger/Starters for Large-Cell Batteries. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery.

Automatic charger/starters turn off when the battery is fully charged, but will continue to monitor the battery and turn back on if voltage drops.

Automatic
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Starting Current, A	Battery Connection Type (Cord Lg.)	Features	Wheel Material	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
12	13-120	45	130	Terminal Clamp (6 ft.)	Power Supply, Ammeter, Reverse-Polarity Protection	Rubber	Three Prong	6	120V AC	33"	12"	12"	000000	0000000

Multiple-Battery Stationary Chargers for Large-Cell Batteries

Charge up to eight batteries at once. After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.

For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
For Battery Voltage	For No. of Batteries	For Battery Cap. Range, amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Features	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
6/12	8	24/44-75	2-12	Terminal Clamp (6 ft.)	Charge Status Indicator	Three Prong	9	120V AC	12 1/8"	19 1/8"	12"	0000000	000000000

Stationary Chargers for Large-Cell Batteries

Bring batteries to these chargers for maintenance. To prevent overcharging, they automatically shut off when battery is fully charged.

For Wet-Cell Lead Acid Batteries
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Battery Connection Type (Cord Lg.)	Features	Power Plug Type	Power Cord Lg., ft.	Input Voltage	Ht.	Wd.	Dp.		Each
12	240-300	30	175-amp North American Style Connector (8 ft.)	Charge Status Indicator, Ammeter	Three Prong	7	120V AC	12 3/16"	7 1/2"	5 1/2"	0000000	0000000
24	240-300	30	175-amp North American Style Connector (8 ft.)	Charge Status Indicator, Ammeter	Three Prong	7	120V AC	12 3/16"	7 1/2"	5 1/2"	0000000	000000
36	160-200	25	175-amp North American Style Connector (8 ft.)	Charge Status Indicator, Ammeter	Three Prong	7	120V AC	12 3/16"	7 1/2"	5 1/2"	0000000	000000

Hand-Held Starters for Large-Cell Batteries

Once fully charged, these starters store enough power to jump start a battery multiple times. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to a battery. They also have a USB port to charge mobile devices such as smartphones and tablets. To recharge, connect them to a USB port with the included cord.

Starters with a 12-volt vehicle plug can be charged in a vehicle outlet.

For 2,000A and 3,000A starters, use the adapter cord with the 12-volt vehicle socket to charge devices that require more power than what the USB cord delivers.

For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
For Battery Voltage	Cold Cranking Amps	Battery Connection Type (Cord Lg.)	Includes	Features	Battery Chemistry	Ht.	Wd.	Dp.		Each
12	500	Terminal Clamp (2 ft.)	3-ft. USB Cord	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	1 11/16"	7 11/16"	3 3/16"	0000000	000000
12	1,000	Terminal Clamp (2 ft.)	3-ft. USB Cord, 12V Vehicle Plug	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	1 11/16"	7 11/16"	3 3/16"	0000000	000000
12	1,500	Terminal Clamp (2 ft.)	3-ft. USB Cord, 12V Vehicle Plug	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	2"	8 5/8"	3 7/16"	0000000	000000
12	2,000	Terminal Clamp (2 ft.)	3-ft. USB Cord, 12V Vehicle Plug, 2-ft. Adapter Cord, 12V Vehicle Socket	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	2 13/16"	8 13/16"	6"	0000000	000000
12	3,000	Terminal Clamp (2 ft.)	3-ft. USB Cord, 12V Vehicle Plug, 2-ft. Adapter Cord, 12V Vehicle Socket	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	2 11/16"	12 3/8"	7 5/16"	0000000	000000

Solar Panel Chargers for Large-Cell Batteries

Rigid

Flexible

Keep batteries charged even when electricity is unavailable. These chargers can be used in any battery capacity range.

Automatic chargers continuously provide a low-level charge to maintain the battery without overcharging.

					Mounting Holes
For Battery Voltage	For Battery Cap., amp-hrs.	Charging Current, A	Output Wattage, W	Battery Connection Type (Cord Lg.)	No. of	Dia.	Mounting Fasteners Included	Includes	Backing Material	Ht.	Wd.	Dp.		Each
Rigid
Automatic Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
12	__	0.2	2.4	Terminal Clamp (108"), 12V Vehicle Plug (108")	4	0.11"	Yes	__	__	19 3/8"	10 1/4"	1 3/8"	00000000	000000
12	__	0.4	4.8	Terminal Clamp (132"), 12V Vehicle Plug (132")	4	0.11"	Yes	__	__	17 1/4"	15"	2 3/4"	00000000	00000
Flexible
Manual Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
12	2-50	0.45	7	5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.)	4	3/8"	No	3-ft. Cord with 12V Vehicle Socket	Vinyl Plastic	23"	14 1/2"	3/64"	0000000	000000
12	5-100	0.9	14	5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.)	4	3/8"	No	3-ft. Cord with 12V Vehicle Socket	Vinyl Plastic	42"	14 1/2"	3/64"	0000000	000000

5-ft. Power Cord with 12V Vehicle Plug for Flexible Chargers

0000000

Each

000000

Power Cords for Large-Cell Battery Solar Panel Chargers

Connect a flexible solar panel charger to a vehicle outlet to charge the vehicle’s battery.

Manufacturer	Manufacturer Model No.	Battery Connection Type	Battery Connection Cord Lg., ft.		Each
PowerFilm	RA-1	12V Vehicle Plug	5	0000000	000000

Battery Chargers

Chargers for lithium ion (Li-Ion) batteries must be used with batteries that match the lithium type.

Chargers cannot be sold to Canada due to import regulations.

For Lithium Ion (Li-Ion) Batteries

Charger for Li-Ion Batteries

For Lithium Type	For Battery Size	For Battery No.	For Battery Voltage	For No. of Batteries	Charging Time, hrs.	Input Voltage	Plug Type	Cord Lg., ft.	Cannot Be Sold To		Each
Lithium Cobalt Oxide (LiCoO2)	14500, 18500, 18650	__	3.7	2	5	120V AC	Two Prong	3 1/2	Canada	0000000	000000
Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4)	14500, 16340, 18500, 18650	K2123A, LFP123A	3.2/3.7	2	5	5V DC	USB-A	2 1/4	Canada	0000000	00000

For Nickel Cadmium (NiCad) and Nickel Metal Hydride (NiMH) Batteries

Charger for NiCad and NiMH Batteries

For No. of Batteries
AA, AAA, C, D	9V	Charging Time, hrs.	Input Voltage	Plug Type	Cord Lg., ft.	Includes	Cannot Be Sold To		Each
4	1	2-10	12V DC	Two Prong	6	120V AC Adapter	Canada	0000000	000000

Rechargeable Batteries

Sub C with Flat Top

4/5 Sub C with Flat Top

16340
with
Button Top

18650
with
Flat Top

26650 with Flat Top

Reduce battery costs by powering devices with rechargeable batteries. These batteries work well in high-drain devices such as digital cameras. When choosing a battery, use the capacity, measured in milliampere-hours, to compare among similar sizes. The higher the mA-hr. rating, the longer the battery should last.

Nickel metal hydride (NiMH) batteries last longer than nickel cadmium batteries. Recharging without completely draining first does not affect battery life.

Nickel cadmium (NiCad) batteries should be drained completely before recharging for maximum battery life.

Lithium ion (Li-Ion) batteries are lightweight and long lasting. For maximum battery life, recharge before they drain completely. Batteries with lithium iron phosphate (LiFePO4) chemistry can be recharged more than twice as many times as NiMH and NiCAD batteries. They’re more stable than other lithium batteries, reducing the risk of thermal runaway if exposed to overheating or short circuiting. Note: These batteries can only be used with LiFePO4-compatible chargers.

Chargers cannot be sold to Canada due to import regulations.

Batteries										Chargers
Battery Size	Voltage	Battery Connection Type	Manufacturer Equivalent Number	Capacity, mA-hrs.	Max. Recharge Cycles	Lithium Type	Pkg. Qty.		Pkg.		Each
Nickel Metal Hydride (NiMH)
Sub C	1.2V DC	Flat Top	HHR300SC, HR23/43	3,300	500	__	1	0000000	00000	000000	00
4/5 Sub C	1.2V DC	Flat Top	HHR200SC, HR23/34	2,000	500	__	1	0000000	0000	000000	00
Nickel Cadmium (NiCad)
Sub C	1.2V DC	Flat Top	KR23/43, P-130SCS, P-150SCS	1,500	500	__	1	0000000	0000	000000	00
Sub C	1.2V DC	Flat Top	KR23/43, P-170SCS, P-200SCS	2,100	500	__	1	0000000	0000	000000	00
Lithium Ion (Li-Ion)
16340	3.2V DC	Button Top	K2123A, LFP123A, RCR123A	500	2,000	Lithium Iron Phosphate (LiFePO4)	1	0000000	0000	0000000	000000
18650	3.2V DC	Flat Top	LFP18650	1,500	2,000	Lithium Iron Phosphate (LiFePO4)	1	0000000	0000	000000	00
26650	3.2V DC	Flat Top	LFP26650E	3,750	2,000	Lithium Iron Phosphate (LiFePO4)	1	0000000	00000	000000	00

Battery Water Fillers

6 fl. oz. Capacity

72 fl. oz. Capacity

Add distilled water to wet-cell lead-acid batteries to maintain performance.

Water fillers with auto shut-off prevent overfilling.

	Nozzle
Capacity, fl. oz.	Style	Lg.	Features	Material		Each
6	Flexible	6"	__	Polyethylene Plastic	000000	00000
72	Rigid	2 1/2"	Auto Shut-Off	Polyethylene Plastic	000000	00000

Replacement Shut-Off Nozzle for 72-oz. Capacity Filler

000000

Each

000000

Battery Water-Filling Cart Repair Parts

Charger

Hose

Switch Panel

Valve

Plug the charger into a wall outlet to charge the cart’s battery.

Install switch panels by replacing the back panel of a battery water-filling cart. The charger jack, hose brackets, and a switch with quick-disconnect wire leads are mounted on the panel.

Component	Manufacturer	Manufacturer Model Number	Includes		Each
Charger	Philadelphia Scientific	CRT-149	__	0000000	0000000
Hose	Philadelphia Scientific	CRT-070	__	0000000	00000
Switch Panel	Philadelphia Scientific	ACC-066	Back Panel, Charger Jack, Hose Brackets, Switch	0000000	000000
Valve	Philadelphia Scientific	INJ-607	__	0000000	000000

Shut-Off Nozzles for Battery Water Fillers

Manufacturer	Manufacturer Model Number	For Manufacturer Model Number		Each
Balcrank	6111-002	6110-017	000000	000000

Battery Water-Filling Carts

Maintain the water level in multiple batteries. These carts have a 10-gallon tank, battery-powered pump, and a hose that attaches to a Battery Water-Filling Gun (not included). To prevent overfilling, the pump has a shut-off switch—when attached to the gun, it will automatically stop pumping when the gun shuts off. These carts cannot be sold to Canada due to local energy efficiency requirements.

Cap., gal.	Hose Lg., ft.	Hose Size	Thread Type	Features	Includes	Ht.	Wd.	Dp.	Material	Cannot Be Sold To		Each
10	9	3/4	GHT	Pump with Shut-Off Switch	12-Volt Rechargeable Dry-Cell AGM Lead-Acid Battery, Charger with 12-ft Power Cord and Two-Prong Plug	37"	17"	17"	Polypropylene Plastic	Canada	0000000	000000000

Replacement Battery	0000000	Each	000000
Replacement Charger	0000000	Each	000000

Battery Water-Filling Vent Caps

Flip open these caps to check the water level and fill a wet-cell lead-acid battery.

Connection Type	ID	Material	Includes	Dia.	Ht.	Pkg. Qty.		Pkg.
Quarter-Turn Bayonet	1"	Polypropylene Plastic	Rubber Washer	1 3/8"	1 7/8"	6	000000	000000

Battery Water-Filling Guns

Attach these guns to a garden hose to fill batteries in hard-to-reach spaces. They have an auto shut-off to prevent overfilling and a built-in regulator to reduce high water pressure to 1.7 gpm.

Nozzle
Style	Dia.	Lg.	Hose Size	Gender	Thread Type	Features	Material		Each
Bent End	5/8"	9 1/4"	3/4	Female	GHT	Auto Shut-Off, Built-In Regulator	ABS Plastic	000000	0000000

Replacement Coupling

0000000

Each

00000

Couplings for Battery Water-Filling Guns

Manufacturer	Manufacturer Model Number	For Manufacturer Model Number	Coupling Type	For Hose Type	Thread Type	Gender	Material	Features	Hose Size		Each
Philadelphia Scientific	ACC-069	GUN-RR, GUN-S, GUN-X	Quick Disconnect	Garden	GHT	Female	Plastic	Check Valve	3/4	0000000	00000

Sealed Large-Cell Batteries for Continuous Use

Quick-Disconnect Tab

Terminal Location K

Provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.

Warning: Batteries should always be charged and discharged in a ventilated area.

				Quick-Disconnect Tab Size
Voltage	Terminal Location	20-hr. Rate Capacity, amp-hrs.	20-hr. Discharge Rate, mA	Positive	Negative	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid
Quick-Disconnect Tab
12V DC	K	7.5	390	0.187"	0.187"	3.9"	6"	2.6"	0000000	000000