Choose a Category
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
For Housing ID For Housing ID |
|---|
Width Width |
|---|
|
|
|
OD OD |
|---|
ID ID |
|---|
|
|
|
Maximum Torque Maximum Torque |
|---|
Spring Material Spring Material |
|---|
|
Cage Material Cage Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Construction Construction |
|---|
|
Lubrication Lubrication |
|---|
|
Trade Number Trade Number |
|---|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
About Ball and Roller Bearings
More
One-Way Locking Needle-Roller Bearing Clutches
Single Row
Triple Row
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches. An arrow on the lip indicates the rotational direction that locks the bearings.
Single-row bearings do not support loads from any direction. To support radial loads, use with our Needle-Roller Bearings.
Triple-row bearings support radial loads.
Bearings with 301 stainless steel springs handle higher temperatures than bearings with acetal springs.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Single Row | ||||||||||||
Acetal Plastic Springs | ||||||||||||
| 1/8" | 9/32" | 1/4" | Steel | __ | __ | 34,000 | 0.2 | Required | 16 | -20° to 200° | 0000000 | 000000 |
| 1/4" | 7/16" | 1/2" | Steel | __ | __ | 20,000 | 1.5 | Required | 16 | -20° to 200° | 0000000 | 00000 |
| 3/8" | 5/8" | 1/2" | Steel | __ | __ | 18,000 | 4 | Required | 16 | -20° to 200° | 0000000 | 00000 |
| 1/2" | 3/4" | 1/2" | Steel | __ | __ | 17,000 | 6.5 | Required | 16 | -20° to 200° | 0000000 | 00000 |
| 5/8" | 7/8" | 5/8" | Steel | __ | __ | 14,000 | 12 | Required | 16 | -20° to 200° | 000000 | 00000 |
| 3/4" | 1" | 5/8" | Steel | __ | __ | 12,000 | 17 | Required | 16 | -20° to 200° | 000000 | 00000 |
| 1" | 1 5/16" | 5/8" | Steel | __ | __ | 8,700 | 35 | Required | 16 | -20° to 200° | 000000 | 00000 |
301 Stainless Steel Springs | ||||||||||||
| 1/4" | 7/16" | 1/2" | Steel | __ | __ | 20,000 | 1.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 3/8" | 5/8" | 1/2" | Steel | __ | __ | 18,000 | 4 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 1/2" | 3/4" | 1/2" | Steel | __ | __ | 17,000 | 6.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 5/8" | 7/8" | 5/8" | Steel | __ | __ | 14,000 | 12 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 3/4" | 1" | 5/8" | Steel | __ | __ | 12,000 | 17 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 1" | 1 5/16" | 5/8" | Steel | __ | __ | 8,700 | 35 | Required | 16 | -20° to 250° | 0000000 | 00000 |
Steel Springs | ||||||||||||
| 6mm | 10mm | 12mm | Steel | __ | __ | 23,000 | 1.3 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 8mm | 12mm | 12mm | Steel | __ | __ | 17,000 | 2.3 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 10mm | 14mm | 12mm | Steel | __ | __ | 14,000 | 3.9 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 12mm | 18mm | 16mm | Steel | __ | __ | 11,000 | 9 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 14mm | 20mm | 16mm | Steel | __ | __ | 9,500 | 12 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 16mm | 22mm | 16mm | Steel | __ | __ | 8,500 | 15 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 18mm | 24mm | 16mm | Steel | __ | __ | 7,500 | 17 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 20mm | 26mm | 16mm | Steel | __ | __ | 7,000 | 21 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 25mm | 32mm | 20mm | Steel | __ | __ | 5,500 | 45 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 30mm | 37mm | 20mm | Steel | __ | __ | 4,500 | 65 | Required | 16 | 10° to 150° | 0000000 | 00000 |
| 35mm | 42mm | 20mm | Steel | __ | __ | 3,900 | 85 | Required | 16 | 10° to 150° | 0000000 | 00000 |
Triple Row | ||||||||||||
301 Stainless Steel Springs | ||||||||||||
| 3/8" | 5/8" | 7/8" | Steel | 1,350 | 1,100 | 18,000 | 4 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 1/2" | 3/4" | 7/8" | Steel | 1,600 | 1,450 | 17,000 | 6.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 5/8" | 7/8" | 1" | Steel | 1,800 | 1,800 | 14,000 | 12 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 3/4" | 1" | 1" | Steel | 2,000 | 2,200 | 12,000 | 17 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 1" | 1 5/16" | 1.063" | Steel | 3,450 | 3,950 | 8,700 | 35 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 8mm | 14mm | 20mm | Steel | 940 | 680 | 21,000 | 3.2 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 10mm | 16mm | 20mm | Steel | 1,050 | 850 | 19,000 | 4.2 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 12mm | 18mm | 26mm | Steel | 1,400 | 1,300 | 19,000 | 10 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 16mm | 22mm | 26mm | Steel | 1,450 | 1,600 | 14,000 | 16 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 20mm | 26mm | 26mm | Steel | 1,800 | 2,100 | 11,000 | 24 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 25mm | 32mm | 30mm | Steel | 2,500 | 2,900 | 8,700 | 50 | Required | 16 | -20° to 250° | 0000000 | 00000 |
| 30mm | 37mm | 30mm | Steel | 2,550 | 3,350 | 7,300 | 70 | Required | 16 | -20° to 250° | 0000000 | 00000 |
One-Way Locking Ball Bearing Clutches
Shielded
Sealed
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction. Use them in applications where precision movement is required, such as pick-and-place and automated indexing conveyor systems. Shields keep out dust and contaminants.
Shielded bearings dissipate heat better than sealed bearings, but don’t keep out as much dust.
For dirty or dusty environments, sealed bearings are the best choice, since they block out contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | |||||||||||||
| 608-2Z | 8 | 22 | 9 | Steel | 720 | 190 | 15,000 | 1.5 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 0000000 |
| FZ 6201 | 12 | 32 | 10 | Steel | 1,150 | 530 | 10,000 | 6.5 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 6202-2Z | 15 | 35 | 11 | Steel | 1,160 | 540 | 9,400 | 15 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 6203-2Z | 17 | 40 | 12 | Steel | 1,270 | 640 | 8,200 | 23 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 6204-2Z | 20 | 47 | 14 | Steel | 1,540 | 940 | 6,800 | 64 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 6205-2Z | 25 | 52 | 15 | Steel | 1,620 | 1,040 | 5,600 | 70 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 6206-2Z | 30 | 62 | 16 | Steel | 1,730 | 1,270 | 4,000 | 165 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 6207-2Z | 35 | 72 | 17 | Steel | 1,830 | 1,490 | 3,600 | 240 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| 40-2Z | 40 | 80 | 22 | Steel | 2,010 | 1,790 | 3,000 | 305 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
Sealed | |||||||||||||
| FZ 6201 2RS | 12 | 32 | 14 | Steel | 1,150 | 530 | 10,000 | 6.5 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6202 2RS | 15 | 35 | 16 | Steel | 1,160 | 540 | 8,400 | 15 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6203 2RS | 17 | 40 | 17 | Steel | 1,270 | 640 | 7,300 | 23 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6204 2RS | 20 | 47 | 19 | Steel | 1,540 | 940 | 6,000 | 64 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6205 2RS | 25 | 52 | 20 | Steel | 1,620 | 1,040 | 5,200 | 70 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6206 2RS | 30 | 62 | 21 | Steel | 1,730 | 1,270 | 4,200 | 165 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6207 2RS | 35 | 72 | 22 | Steel | 1,830 | 1,490 | 3,600 | 240 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
| FZ 6208 2RS | 40 | 80 | 27 | Steel | 2,010 | 1,790 | 3,000 | 305 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |