Corrosion Resistant Ball Bearing Carriages And Guide Rails

	Rail Width Rail Width

5 mm

7 mm

	Carriage Profile Carriage Profile


Standard	Flanged

	Carriage Width Carriage Width

	Load Fastening Load Fastening


From Top	From Bottom

	Overall Height Overall Height

	Mounting Hole Thread Size Mounting Hole Thread Size

M2.5

M10

	Carriage Length Carriage Length

	Number of Mounting Holes Number of Mounting Holes

	Bearing Material Bearing Material

Stainless Steel

	Carriage Material Carriage Material

Stainless Steel

	Static Load Capacity Static Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

	Dynamic Load Capacity Dynamic Load Capacity

	Maximum Temperature Maximum Temperature

Less than 250° F

	Static Pitch Moment Load Capacity Static Pitch Moment Load Capacity

Less than 500 ft.-lbs.

500 to 999 ft.-lbs.

	Bearing Type Bearing Type

	Ball

	Static Yaw Moment Load Capacity Static Yaw Moment Load Capacity

Less than 500 ft.-lbs.

500 to 999 ft.-lbs.

	Carriage and Guide Rail Type Carriage and Guide Rail Type

Ball Bearing

	Lubricant Lubricant

Grease with Aluminum
Thickener

Grease with Lithium
Thickener

	Static Roll Moment Load Capacity Static Roll Moment Load Capacity

	Lubrication Inlet Lubrication Inlet

Grease Fitting

Lubrication Hole

	End Seal Material End Seal Material

Rubber

Plastic

	Mounting Hole Thread Pitch Mounting Hole Thread Pitch

	Mounting Hole Depth Mounting Hole Depth

62 Products

About Moment Loads

Corrosion-Resistant Ball Bearing Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

Standard Carriage

Load Fastening from Top

Guide Rail

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
5	150	6	12	19	000000	000000	60; 90; 120; 150	0000000	00000	30-195	0000000	00000	000000	00
7	290	8	17	23.5	000000	00000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
9	400	10	20	30	000000	00000	80; 160; 220; 280	0000000	000	40-840	0000000	000	000000	00
10	190	6.5	17	24.5	000000	00000	60; 120; 160; 280	0000000	000	40-280	0000000	000	000000	00
12	740	13	27	34	000000	00000	150; 200; 350; 475	0000000	000	50-975	0000000	000	000000	00
14	390	9	25	31.5	000000	00000	90; 150; 240; 300	0000000	000	60-270	0000000	000	000000	00
15	1,650	24	34	66	0000000	000000	100; 220; 340; 400	0000000	000	100-1,800	00000000	000	000000	00
18	510	12	30	39	000000	000000	120; 180; 240; 300	0000000	000	60-660	0000000	000	000000	00
20	2,300	28	42	76	0000000	000000	280; 500; 1,000; 1,480	0000000	000	140-3,600	00000000	000	00000000	00000
23	3,900	33	48	92	0000000	000000	280; 500; 1,000; 1,480	0000000	000	142-3,600	00000000	000	00000000	000
24	960	14	40	44	000000	000000	120; 160; 320; 400	0000000	000	80-640	0000000	000	000000	00
28	5,650	42	60	108	0000000	000000	500; 760; 1,000; 2,000	0000000	000	184-3,600	00000000	000	00000000	000
30	1,300	15	50	49.5	000000	000000	160; 240; 320; 560	0000000	000	80-640	0000000	0000	000000	00
34	8,450	48	70	121	0000000	000000	500; 760; 1,000; 2,000	0000000	000	184-3,600	00000000	000	00000000	000
42	1,550	16	60	55	000000	000000	160; 240; 320; 560	0000000	0000	80-640	0000000	0000	000000	00

Flanged Carriages and Guide Rails

Flanged Carriage

Load Fastening from Bottom

Load Fastening from Top

Guide Rail

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top and From Bottom
15	2,400	24	47	57	0000000	0000000	160; 280; 460; 640	0000000	00000	000000	00000
20	4,400	30	63	74	0000000	000000	280; 460; 640; 820	0000000	000	000000	0000
23	6,150	36	70	83	0000000	000000	280; 460; 640; 1,000	0000000	0000	000000	0000
28	9,050	42	90	98	0000000	000000	280; 440; 760; 1,240	0000000	0000	000000	0000
34	12,050	48	100	109	0000000	000000	280; 440; 760; 1,240	0000000	0000	000000	0000