Clear All

	Carriage Width Carriage Width

40 mm

50 mm

	Load Fastening Load Fastening


From Top	From Bottom

	Rail Width Rail Width

	Carriage Profile Carriage Profile


Standard	Flanged

	Overall Height Overall Height

	Bearing Material Bearing Material

Steel

Stainless Steel

	Static Load Capacity Static Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

20,000 to 29,999 lbs.

	Static Roll Moment Load Capacity Static Roll Moment Load Capacity

	Carriage Length Carriage Length

	Carriage Material Carriage Material

Steel

Stainless Steel

	Rail Length Rail Length

	Bearing Type Bearing Type

	Ball

	Dynamic Load Capacity Dynamic Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

	Static Yaw Moment Load Capacity Static Yaw Moment Load Capacity

Less than 500 ft.-lbs.

1,000 to 1,999 ft.-lbs.

	Lubrication Lubrication

Lubricated

	Cage Material Cage Material

Plastic

	End Seal Material End Seal Material

Rubber

	Number of Mounting Holes Number of Mounting Holes

	Static Pitch Moment Load Capacity Static Pitch Moment Load Capacity

Less than 500 ft.-lbs.

	Lubrication Inlet Lubrication Inlet

Grease Fitting

	Grease Fitting Thread Type Grease Fitting Thread Type

Metric

Unthreaded

	Maximum Temperature Maximum Temperature

175° to 199° F

	Lubricant Lubricant

Grease with Lithium
Thickener

View catalog page

Forward

How can we improve?

129 Products

About Moment Loads

Carriage

Guide Rail

Flanged Carriage

Load Fastening from Bottom

Load Fastening from Top

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages. They’re good for use in areas where multiple carriages or rails won't fit. End seals keep dust out, and the cage traps lubricant around the bearings, reducing friction and heat buildup. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Steel Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
37	1,850	21	54	59	0000000	0000000	130; 230; 380; 480; 580; 780	0000000	00000	130-780	0000000	00000	000000	00000
42	3,550	27	62	73	0000000	000000	160; 280; 340; 460; 640; 820	0000000	000	160-820	0000000	0000	000000	0000
69	7,950	35	100	107	0000000	000000	280; 440; 760; 1,000; 1,240; 1,560	0000000	000	280-1,560	0000000	0000	000000	0000
90	15,750	50	130	141	0000000	000000	130; 230; 380; 480; 580; 780	0000000	000	__	000000	00	000000	0000

Flanged Carriages and Guide Rails

Steel Carriages							Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top and From Bottom
37	1,850	21	68	59	00000000	0000000	130; 230; 380; 480; 580; 780	0000000	00000	000000	00000
42	3,550	27	80	73	00000000	000000	160; 280; 340; 460; 640; 820	0000000	000	000000	0000
69	7,950	35	120	107	00000000	000000	280; 440; 760; 1,000; 1,240; 1,560	0000000	000	000000	0000
90	15,750	50	162	141	00000000	000000	280; 440; 760; 1,000; 1,240; 1,640; 2,040	0000000	000	000000	0000

Standard Carriages and Guide Rails—Assembled

Stainless Steel Carriages and Guide Rails									Mounting Hole Plugs
Rail Wd., mm	Rail Lg., mm	Rail Ht., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each		Each
Load Fastening From Top
One Carriage
18	70	6.6	950	12	30	37	00000000	0000000	000000	00000
18	70	6.6	1,200	12	30	51	00000000	000000	000000	000
18	110	6.6	950	12	30	37	00000000	000000	000000	000
18	110	6.6	1,200	12	30	51	00000000	000000	000000	000
18	150	6.6	950	12	30	37	00000000	000000	000000	000
18	150	6.6	1,200	12	30	51	00000000	000000	000000	000
18	190	6.6	950	12	30	37	00000000	000000	000000	000
18	190	6.6	1,200	12	30	51	00000000	000000	000000	000
18	230	6.6	950	12	30	37	00000000	000000	000000	000
18	230	6.6	1,200	12	30	51	00000000	000000	000000	000
18	270	6.6	950	12	30	37	00000000	000000	000000	000
18	270	6.6	1,200	12	30	51	00000000	000000	000000	000
18	310	6.6	950	12	30	37	00000000	000000	000000	000
18	310	6.6	1,200	12	30	51	00000000	000000	000000	000
18	390	6.6	950	12	30	37	00000000	000000	000000	000
18	390	6.6	1,200	12	30	51	00000000	000000	000000	000
24	70	7.5	1,550	14	40	46	00000000	000000	000000	000
24	110	7.5	1,550	14	40	46	00000000	000000	000000	000
24	150	7.5	1,550	14	40	46	00000000	000000	000000	000
24	190	7.5	1,550	14	40	46	00000000	000000	000000	000
24	230	7.5	1,550	14	40	46	00000000	000000	000000	000
24	270	7.5	1,550	14	40	46	00000000	000000	000000	000
24	310	7.5	1,550	14	40	46	00000000	000000	000000	000
24	390	7.5	1,550	14	40	46	00000000	000000	000000	000
24	470	7.5	1,550	14	40	46	00000000	000000	000000	000
24	550	7.5	1,550	14	40	46	00000000	000000	000000	000
24	670	7.5	1,550	14	40	46	00000000	000000	000000	000
33	110	8.6	1,700	17	50	51	00000000	000000	000000	000
33	190	8.6	1,700	17	50	51	00000000	000000	000000	000
33	310	8.6	1,700	17	50	51	00000000	00000000	000000	000
33	470	8.6	1,700	17	50	51	00000000	00000000	000000	000
33	550	8.6	1,700	17	50	51	00000000	00000000	000000	000
Two Carriages
18	110	6.6	950	12	30	37	00000000	000000	000000	000
18	110	6.6	1,200	12	30	51	00000000	000000	000000	000
18	150	6.6	950	12	30	37	00000000	000000	000000	000
18	150	6.6	1,200	12	30	51	00000000	000000	000000	000
18	190	6.6	950	12	30	37	00000000	000000	000000	000
18	190	6.6	1,200	12	30	51	00000000	000000	000000	000
18	230	6.6	950	12	30	37	00000000	000000	000000	000
18	230	6.6	1,200	12	30	51	00000000	000000	000000	000
18	270	6.6	950	12	30	37	00000000	000000	000000	000
18	270	6.6	1,200	12	30	51	00000000	000000	000000	000
18	310	6.6	950	12	30	37	00000000	000000	000000	000
18	310	6.6	1,200	12	30	51	00000000	000000	000000	000
18	390	6.6	950	12	30	37	00000000	000000	000000	000
18	390	6.6	1,200	12	30	51	00000000	000000	000000	000
18	470	6.6	950	12	30	37	00000000	000000	000000	000
18	470	6.6	1,200	12	30	51	00000000	000000	000000	000
24	110	7.5	1,550	14	40	46	00000000	000000	000000	000
24	150	7.5	1,550	14	40	46	00000000	000000	000000	000
24	190	7.5	1,550	14	40	46	00000000	000000	000000	000
24	230	7.5	1,550	14	40	46	00000000	000000	000000	000
24	270	7.5	1,550	14	40	46	00000000	000000	000000	000
24	310	7.5	1,550	14	40	46	00000000	000000	000000	000
24	390	7.5	1,550	14	40	46	00000000	000000	000000	000
24	470	7.5	1,550	14	40	46	00000000	000000	000000	000
24	550	7.5	1,550	14	40	46	00000000	000000	000000	000
24	670	7.5	1,550	14	40	46	00000000	00000000	000000	000
33	190	8.6	1,700	17	50	51	00000000	000000	000000	000
33	310	8.6	1,700	17	50	51	00000000	00000000	000000	000
33	470	8.6	1,700	17	50	51	00000000	00000000	000000	000
33	550	8.6	1,700	17	50	51	00000000	00000000	000000	000

Flanged Carriages and Guide Rails—Assembled

Stainless Steel Carriages and Guide Rails									Mounting Hole Plugs
Rail Wd., mm	Rail Lg., mm	Rail Ht., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each		Each
Load Fastening From Top and From Bottom
One Carriage
18	70	6.6	950	12	40	37	00000000	0000000	000000	00000
18	110	6.6	950	12	40	37	00000000	000000	000000	000
18	150	6.6	950	12	40	37	00000000	000000	000000	000
18	190	6.6	950	12	40	37	00000000	000000	000000	000
18	230	6.6	950	12	40	37	00000000	000000	000000	000
18	270	6.6	950	12	40	37	00000000	000000	000000	000
18	310	6.6	950	12	40	37	00000000	000000	000000	000
18	390	6.6	950	12	40	37	00000000	00000000	000000	000
24	70	7.5	1,550	14	50	46	00000000	000000	000000	000
24	110	7.5	1,550	14	50	46	00000000	000000	000000	000
24	150	7.5	1,550	14	50	46	00000000	000000	000000	000
24	190	7.5	1,550	14	50	46	00000000	000000	000000	000
24	230	7.5	1,550	14	50	46	00000000	000000	000000	000
24	270	7.5	1,550	14	50	46	00000000	000000	000000	000
24	310	7.5	1,550	14	50	46	00000000	000000	000000	000
24	390	7.5	1,550	14	50	46	00000000	00000000	000000	000
24	470	7.5	1,550	14	50	46	00000000	000000	000000	000
24	550	7.5	1,550	14	50	46	00000000	000000	000000	000
24	670	7.5	1,550	14	50	46	00000000	000000	000000	000
33	110	8.6	1,700	17	60	51	00000000	000000	000000	000
33	190	8.6	1,700	17	60	51	00000000	000000	000000	000
33	310	8.6	1,700	17	60	51	00000000	00000000	000000	000
33	470	8.6	1,700	17	60	51	00000000	00000000	000000	000
33	550	8.6	1,700	17	60	51	00000000	00000000	000000	000
Two Carriages
18	110	6.6	950	12	40	37	00000000	000000	000000	000
18	150	6.6	950	12	40	37	00000000	000000	000000	000
18	190	6.6	950	12	40	37	00000000	000000	000000	000
18	230	6.6	950	12	40	37	00000000	000000	000000	000
18	270	6.6	950	12	40	37	00000000	000000	000000	000
18	310	6.6	950	12	40	37	00000000	00000000	000000	000
18	390	6.6	950	12	40	37	00000000	00000000	000000	000
18	470	6.6	950	12	40	37	00000000	00000000	000000	000
24	110	7.5	1,550	14	50	46	00000000	000000	000000	000
24	150	7.5	1,550	14	50	46	00000000	000000	000000	000
24	190	7.5	1,550	14	50	46	00000000	000000	000000	000
24	230	7.5	1,550	14	50	46	00000000	000000	000000	000
24	270	7.5	1,550	14	50	46	00000000	000000	000000	000
24	310	7.5	1,550	14	50	46	00000000	000000	000000	000
24	390	7.5	1,550	14	50	46	00000000	000000	000000	000
24	470	7.5	1,550	14	50	46	00000000	000000	000000	000
24	550	7.5	1,550	14	50	46	00000000	000000	000000	000
24	670	7.5	1,550	14	50	46	00000000	00000000	000000	000
33	190	8.6	1,700	17	60	51	00000000	00000000	000000	000
33	310	8.6	1,700	17	60	51	00000000	00000000	000000	000
33	470	8.6	1,700	17	60	51	00000000	00000000	000000	000
33	550	8.6	1,700	17	60	51	00000000	00000000	000000	000

129 Products

About Moment Loads

High-Cycle Extra-Wide Ball Bearing Carriages and Guide Rails