About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/8" | 1" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
11/16" | 1" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 1" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
13/16" | 1" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/8" | 1" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 1" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with Steel Shell and Neoprene Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||
1" | 1" | 7/8" | 1,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 000000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
3/8" | 1" | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 00000 |
1/2" | 1" | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 1/2" | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
11/16" | 1/2" | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
3/4" | 1/2" | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||
For 12mm Shaft Dia. | ||||||
16mm | 14mm | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||
10mm | 25mm | 1,000 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
16mm | 12mm | 1,000 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
20mm | 12mm | 1,000 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
3/4" | 1" | 1" | 1/8" | 1,000 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
3/4" | 1" | 1" | 1/8" | 1,000 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||||
5/8" | 1" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 00000 |
3/4" | 1" | 1" | 1/8" | 1,000 lbs. @ 120 rpm | 930 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 0000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||
5/8" | 1/2" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | -70° to 450° | 000000 | 000000 |
3/4" | 1/2" | 1" | 1/8" | 1,000 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | -70° to 450° | 000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1/2" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
11/16" | 1/2" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
3/4" | 1/2" | 1" | 1/8" | 1,000 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||||
14mm | 12mm | 16mm | 1mm | 1,000 lbs. @ 120 rpm | 610 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
16mm | 12mm | 20mm | 2mm | 1,000 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
20mm | 12mm | 28mm | 4mm | 1,000 lbs. @ 120 rpm | 2,800 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||
5/8" | 1/2" | 7/8" | 1/8" | 1,000 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 000000 |
3/4" | 1/2" | 1" | 1/8" | 1,000 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 00000 |
Vibration-Damping Oil-Embedded Mounted Sleeve Bearings
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise. At startup, friction causes the bearing to release a thin layer of oil on the bearing’s surface. All are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
1/2" | 9/16" | 1 1/8" | 2 3/4" | 1" | 1" | 15/32" | 5/16" | 2" | 1,000 lbs. @ 120 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 000000 |