About Plain Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
MDS-Filled Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||
5/8" | 1" | 105 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
Graphalloy bearings perform at extreme temperatures and under water. They are electrically conductive and wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
Graphalloy | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
5/8" | 3/8" | 105 lbs. @ 120 rpm | Embedded | -450° to 750° | 0000000 | 000000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re also bright blue, making them easy to spot if they fall into your line.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric Acetal Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | |||||||
7mm | 10mm | 105 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
For 6mm Shaft Dia. | |||||||
8mm | 10mm | 105 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
For 10mm Shaft Dia. | |||||||
12mm | 10mm | 105 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
For 12mm Shaft Dia. | |||||||
14mm | 10mm | 105 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
PEEK bearings are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
MDS-Filled Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||
5/8" | 1" | 7/8" | 1/16" | 105 lbs. @ 120 rpm | 50 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 00000 |
Thermoplastic-Blend Bearings | |||||||||
For 8mm Shaft Dia. | |||||||||
12mm | 9mm | 16mm | 2mm | 105 lbs. @ 120 rpm | 110 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |