Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 1 5/16" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
1 5/8"	4"	10,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	000000
For 1 1/2" Shaft Dia.
2"	3 1/2"	10,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	10° to 175°	00000000	00000
For 1 3/4" Shaft Dia.
2"	3"	10,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 1/4"	3"	10,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	10° to 175°	00000000	00000
For 2" Shaft Dia.
2 3/8"	2 3/4"	10,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 40mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
50mm	60mm	10,500 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000
For 50mm Shaft Dia.
60mm	60mm	10,500 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Use these bearings for frequent starts and stops in high-load applications. Startup friction causes these bearings to release a thin layer of oil that contains PTFE to lubricate the bearing’s surface. All have more iron content than standard oil-embedded bearings to handle heavier loads and higher shock loads, but operate at lower speeds.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 40 mm Shaft Dia.
50	60	10,500 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000
For 50 mm Shaft Dia.
60	60	10,500 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

660 leaded bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 932 bronze bearings.

Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Grooved

660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 1 1/2" Shaft Dia.
1 3/4"	2"	10,500 lbs. @ 30 rpm	Grooved	-350° to 450°	00000000	000000

Multipurpose Sleeve Bearings

These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 1 1/2" Shaft Dia.
1 3/4"	1 3/4"	10,500 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000
For 1 3/4" Shaft Dia.
2"	1 1/2"	10,500 lbs. @ 30 rpm	Required	-350° to 450°	00000000	0000

Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 660 leaded bronze is sometimes called 932 bronze.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 1 1/2" Shaft Dia.
1 7/8"	2"	10,500 lbs. @ 30 rpm	Required	-350° to 450°	0000000	000000
2"	2"	10,500 lbs. @ 30 rpm	Required	-350° to 450°	0000000	00000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 1 3/4" Shaft Dia.
2 1/4"	2 1/2"	3"	1/4"	10,500 lbs. @ 30 rpm	9,300 lbs. @ 30 rpm	Lubricated	ISO 68 Oil	-140° to 460°	00000000	000000