About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
11/16" | 1 1/2" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 1 1/8" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
11/16" | 1 1/8" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 1 1/8" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 12 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
20 | 30 | 1,100 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/8" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
7/16" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
1/2" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 3/8" Shaft Dia. | |||||||
1/2" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
9/16" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
5/8" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
3/4" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 7/16" Shaft Dia. | |||||||
9/16" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
5/8" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
5/8" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
11/16" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
3/4" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
1" | 1" | 1,100 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
1/2" | 3/4" | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
9/16" | 3/4" | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
5/8" | 3/4" | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 9/16" | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
3/8" | 1" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 000000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 1/2" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
3/4" | 1/2" | 1,100 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||||||
5/8" | 1" | 7/8" | 1/16" | 1,100 lbs. @ 120 rpm | 620 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1" | 7/8" | 1/8" | 1,100 lbs. @ 120 rpm | 510 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
3/4" | 1" | 1" | 1/8" | 1,100 lbs. @ 120 rpm | 650 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
863 iron-copper bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases. They’re also known as Super Oilite® bearings.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||||
5/8" | 1" | 7/8" | 1/8" | 1,100 lbs. @ 120 rpm | 510 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
3/4" | 1" | 1" | 1/8" | 1,100 lbs. @ 120 rpm | 650 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||||||
1/2" | 3/4" | 11/16" | 1/16" | 1,100 lbs. @ 120 rpm | 900 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
9/16" | 3/4" | 11/16" | 1/16" | 1,100 lbs. @ 120 rpm | 900 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
5/8" | 3/4" | 7/8" | 1/16" | 1,100 lbs. @ 120 rpm | 1,300 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||
5/8" | 1/2" | 7/8" | 1/8" | 1,100 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 00000 |
3/4" | 1/2" | 1" | 1/8" | 1,100 lbs. @ 120 rpm | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 8mm Shaft Dia. | |||||||||
12mm | 20mm | 16mm | 2mm | 1,100 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
14mm | 20mm | 20mm | 3mm | 1,100 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
16mm | 20mm | 24mm | 4mm | 1,100 lbs. @ 120 rpm | 2,600 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
1/2" | 3/4" | 11/16" | 1/16" | 1,100 lbs. @ 120 rpm | 900 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 000000 |