11,900 lbs. Dynamic Radial Load Capacity Bearings

Filter by

System of Measurement

Shaft Diameter

Width

Bearing Trade Number

Bearing Seal Type

Bearing Type

Radial Clearance Trade Number

For Load Direction

Ball Bearing Profile

For Housing ID

Dynamic Radial Load Capacity

Shaft Type

Shaft Mount Type

Static Radial Load Capacity

Ring Material

Lubricant

DFARS Compliance

Minimum Temperature

REACH Compliance

RoHS Compliance

Maximum Temperature

Forward

How can we improve?

6 Products

About Ball and Roller Bearings

Ball Bearings

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

Open

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6309	45mm	100mm	25mm	Steel	11,900	7,050	9,500	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	000000

Shielded

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6017-2Z	85mm	130mm	22mm	Steel	11,900	9,650	6,100	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	0000000
6309-2Z	45mm	100mm	25mm	Steel	11,900	7,050	6,700	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	00000

Sealed

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6017-2RS	85mm	130mm	22mm	Steel	11,900	9,650	2,700	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	0000000
6309-2RS	45mm	100mm	25mm	Steel	11,900	6,800	6,700	Lubricated	-20° to 230°	ABEC-1	__	00000000	00000

Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

				Radial Load Cap., lbs.
For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	For Shaft Surface Smoothness (Ra), microinch	Temp. Range, °F	Specifications Met		Each
Open
60mm	68mm	32mm	Steel	11,900	30,300	4,450	Required	8	-20° to 280°	DIN 618, ISO 3245	00000000	000000