About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
8 | 8 | 120 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/16" | 1/2" | 120 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||
8mm | 10mm | 10mm | 120 lbs. @ 120 rpm | Maroon | -400° to 500° | 00000000 | 000000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | |||||||||
8mm | 10mm | 12mm | 1mm | 120 lbs. @ 120 rpm | 85 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
10mm | 10mm | 14mm | 2mm | 120 lbs. @ 120 rpm | 105 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
For 8mm Shaft Dia. | |||||||||
10mm | 10mm | 14mm | 1mm | 120 lbs. @ 120 rpm | 90 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
10mm | 10mm | 15mm | 1mm | 120 lbs. @ 120 rpm | 100 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
For 10mm Shaft Dia. | |||||||||
16mm | 10mm | 22mm | 3mm | 120 lbs. @ 120 rpm | 165 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
For 12mm Shaft Dia. | |||||||||
14mm | 10mm | 18mm | 1mm | 120 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |