About Ball and Roller Bearings
More
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
693-2RS | 3 | 8 | 4 | 440C Stainless Steel | 125 | 40 | 54,500 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
High-Load Plastic Ball Bearings
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings. They’re commonly used in bottle-filling machines and other food-processing applications. The acetal body doesn’t absorb water, so it can operate in liquids or be washed down without losing strength. The balls are made of either glass or 316 stainless steel—both materials are corrosion resistant. Since there’s no metal-on-metal contact between the balls and the body, these bearings don’t require lubrication.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter | For Housing ID | Width | Ring Material | Dynamic | Static | Maximum Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
316 Stainless Steel Balls | ||||||||||||
Open | ||||||||||||
R16 | 1" | 2" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 000000 |
R16 | 1 1/4" | 2" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R20 | 1 1/4" | 2 1/4" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5205-6 | 25mm | 52mm | 21mm | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
Glass Balls | ||||||||||||
Open | ||||||||||||
R16 | 1" | 2" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
Low-Profile Mounted Ball Bearings
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Overall | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed 440C Stainless Steel Bearings with Aluminum Housing | |||||||||||||
Shaft Mount Type: Press Fit | |||||||||||||
6mm | 3/8" | 3/4" | 1 29/64" | 13/64" | 1 1/8" | 125 | 50 | 21,500 | 0° to 230° | Fixed Alignment | Lubricated | 0000000 | 000000 |
Light Duty Mounted Ball Bearings with Two-Bolt Flange
Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants from one side.
Shielded bearings are protected from dust and contaminants on both sides.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Open 440C Stainless Steel Bearings with PEEK Plastic Housing | ||||||||||||||
Shaft Mount Type: Press Fit | ||||||||||||||
1/8" | 5/8" | 1 5/32" | 5/16" | 11/64" | 11/64" | 3/4" | 125 | 50 | 53,000 | -140° to 480° | Fixed Alignment | Lubricated | 0000000 | 00000 |
Shielded 440C Stainless Steel Bearings with PEEK Plastic Housing | ||||||||||||||
Shaft Mount Type: Press Fit | ||||||||||||||
1/8" | 5/8" | 1 5/32" | 5/16" | 11/64" | 11/64" | 3/4" | 125 | 50 | 53,000 | -140° to 480° | Fixed Alignment | Lubricated | 0000000 | 0000 |