For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
 | Thrust |
For Shaft Type For Shaft Type |
|---|
 | Round |
Ring Material Ring Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
|
Ball Material Ball Material |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
Lubrication Lubrication |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Show |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity | Hide |
|---|
Shaft Mount Type Shaft Mount Type |
|---|
|
Cage Material Cage Material |
|---|
|
About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2 | 1/8" | 3/8" | 5/32" | Steel | 140 | 50 | 60,000 | Required | -20° to 230° | ABEC-1 | 000000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-2Z | 1/8" | 3/8" | 5/32" | Steel | 140 | 50 | 54,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-2RS | 1/8" | 3/8" | 5/32" | Steel | 140 | 25 | 56,000 | Lubricated | -20° to 230° | ABEC-1 | 000000000 | 00000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| R2 | 1/8" | 3/8" | 5/32" | Steel | 140 | 50 | 50,000 | Lubricated | 10° to 200° | ABEC-1 | 0000000 | 000000 |
| 6801 | 12mm | 21mm | 5mm | Steel | 140 | 60 | 18,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
| R2-2RS | 1/8" | 3/8" | 5/32" | Steel | 140 | 50 | 50,000 | Lubricated | 10° to 200° | ABEC-1 | 0000000 | 00000 |
Stainless Steel Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-6 | 1/8" | 3/8" | 7/64" | 440C Stainless Steel | 140 | 45 | 63,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-6-2Z | 1/8" | 3/8" | 9/64" | 440C Stainless Steel | 140 | 45 | 63,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
| R2A-2Z | 1/8" | 1/2" | 11/64" | 440C Stainless Steel | 140 | 45 | 63,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 0000 |
| 623-2Z | 3mm | 10mm | 4mm | 440C Stainless Steel | 140 | 45 | 56,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
Inner Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-6-2Z | 1/8" | 3/8" | 9/64" | 0.181" | 0.172" | 440C Stainless Steel | 140 | 45 | 63,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| R2 | 1/8" | 3/8" | 5/32" | 440C Stainless Steel | 140 | 45 | 67,000 | Lubricated | -10° to 240° | ABEC-5 | 000000000 | 00000 |
Shielded | ||||||||||||
| R2-2Z | 1/8" | 3/8" | 5/32" | 440C Stainless Steel | 140 | 45 | 67,000 | Lubricated | -10° to 240° | ABEC-5 | 000000000 | 0000 |
| R3-2Z | 3/16" | 1/2" | 0.196" | 440C Stainless Steel | 140 | 55 | 17,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 0000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2 | 1/8" | 3/8" | 5/32" | 0.44" | 0.03" | 440C Stainless Steel | 140 | 45 | 67,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
| 148 | 8mm | 14mm | 3.5mm | 15.6mm | 0.8mm | 440C Stainless Steel | 140 | 65 | 50,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
| 623 | 3mm | 10mm | 4mm | 11.5mm | 1mm | Steel | 140 | 45 | 78,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-2Z | 1/8" | 3/8" | 5/32" | 0.44" | 0.03" | 440C Stainless Steel | 140 | 45 | 67,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
| R2-6-2Z | 1/8" | 3/8" | 9/64" | 0.422" | 0.03" | 440C Stainless Steel | 140 | 45 | 63,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 0000 |
| 148-2Z | 8mm | 14mm | 4mm | 15.6mm | 0.8mm | 440C Stainless Steel | 140 | 65 | 42,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Extended
Inner Ring
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R2-6-2Z | 1/8" | 3/8" | 9/64" | 0.422" | 0.03" | 0.181" | 0.172" | 440C Stainless Steel | 140 | 45 | 63,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
Precision Flanged Ball Bearings
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings. All are 440C stainless steel for good corrosion resistance. The flange ensures proper positioning inside a tube or housing.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||||
| R3-2Z | 3/16" | 1/2" | 0.196" | 0.565" | 0.04" | 440C Stainless Steel | 140 | 55 | 17,000 | Lubricated | -60° to 250° | ABEC-7 | 0000000 | 00000 |
Extreme-Temperature Threaded Track Rollers
Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Max. Speed, rpm | Dynamic Radial Load Cap., lbs. | Temp. Range, °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | |||||||||||
| 2" | 1 1/4" | 7/8" | 2" | 7/8"-14 | 1" | 100 | 140 | -450° to 750° | Plain | 0000000 | 0000000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||
| 9/16" | 1/4" | 4mm | 1/4" | 1/8" | 1/16" | 7,000 | 140 | 140 | 20 | 210° | Ball | __ | 0000000 | 000000 |
Steel V-Groove Rollers without Seal | ||||||||||||||
| 9/16" | 1/4" | 4mm | 1/4" | 1/8" | 1/16" | 7,000 | 140 | 140 | 20 | 245° | Ball | Shielded | 0000000 | 00000 |
Threaded V-Groove Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
440C stainless steel rollers offer better corrosion resistance than steel rollers.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Includes | Each | |
440C Stainless Steel V-Groove Rollers with Seal | ||||||||||||||||||||
| 15 | 6 | 4 | 10 | M4 | 0.7 | 6 | 2 | 9.5 | 3 | 1 | 7,000 | 140 | 140 | 20 | 210° | Ball | __ | Mounting Hardware | 0000000 | 000000 |
| 15 | 6 | 6 | 8 | M6 | 1 | 7 | 2.9 | 9.5 | 3 | 1 | 7,000 | 140 | 140 | 20 | 210° | Ball | __ | __ | 0000000 | 00000 |
440C Stainless Steel V-Groove Rollers without Seal | ||||||||||||||||||||
| 15 | 6 | 6 | 8 | M6 | 1 | 7 | 2.9 | 9.5 | 3 | 1 | 7,000 | 140 | 140 | 20 | 245° | Ball | Shielded | __ | 0000000 | 00000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
440C stainless steel rollers offer better corrosion resistance than steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Features | Includes | Each | |
440C Stainless Steel V-Groove Rollers without Seal | |||||||||||||||||||
| 15 | 6 | 4 | 10 | M4 | 0.7 | 6 | 2 | 11 | 3 | 1 | 7,000 | 140 | 140 | 20 | 210° | Shielded | Mounting Hardware | 0000000 | 000000 |
| 15 | 6 | 5.5 | 8 | M5 | 0.8 | 5 | 2.9 | 9.5 | 3 | 1 | 7,000 | 140 | 140 | 20 | 210° | Shielded | __ | 0000000 | 00000 |
| 15 | 6 | 5.5 | 8 | M5 | 0.8 | 5 | 2.9 | 9.5 | 3 | 1 | 7,000 | 140 | 140 | 20 | 245° | Shielded | __ | 0000000 | 00000 |