About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/8" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
11/16" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
3/4" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
13/16" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/8" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 10mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
14mm | 16mm | 1,500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
16mm | 16mm | 1,500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
For 12mm Shaft Dia. | |||||||
16mm | 16mm | 1,500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
18mm | 16mm | 1,500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
5/8" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
1/2" | 1" | 1,500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
9/16" | 1" | 1,500 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 0000 |
5/8" | 1" | 1,500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 3/4" | 1,500 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 0000 |
11/16" | 3/4" | 1,500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
3/4" | 3/4" | 1,500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1 1/2" | 7/8" | 1/8" | 1,500 lbs. @ 120 rpm | 730 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||
5/8" | 3/4" | 7/8" | 1/8" | 1,500 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | -70° to 450° | 000000 | 000000 |
3/4" | 3/4" | 1" | 1/8" | 1,500 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | -70° to 450° | 000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||||||
5/8" | 1" | 7/8" | 1/16" | 1,500 lbs. @ 120 rpm | 1,300 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
For 1/2" Shaft Dia. | ||||||||||
5/8" | 3/4" | 7/8" | 1/8" | 1,500 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
11/16" | 3/4" | 7/8" | 1/8" | 1,500 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
3/4" | 3/4" | 1" | 1/8" | 1,500 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||
5/8" | 3/4" | 7/8" | 1/8" | 1,500 lbs. @ 120 rpm | 1,100 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 000000 |