About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/8" | 5/16" | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1/2" | 5/16" | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 5/16" Shaft Dia. | |||||||
3/8" | 1/4" | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/16" | 1/4" | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1/2" | 1/4" | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
8mm | 5mm | 155 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with 304 Stainless Steel Shell and Silicone Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||
20mm | 25mm | 25mm | 155 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -35° to 300° | 0000000 | 0000000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
---|---|---|---|---|---|---|---|
For 5 mm Shaft Dia. | |||||||
8 | 5 | 155 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW and acetal bearings, and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||
3/8" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 000000 |
1/2" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |
For 3/8" Shaft Dia. | |||||||
15/32" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |
9/16" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |
For 1/2" Shaft Dia. | |||||||
19/32" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |
3/4" | 1/2" | 155 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||
0.316" | 3/8" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 000000 | 000000 |
0.316" | 1/2" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 0000 |
For 3/8" Shaft Dia. | |||||||
0.379" | 15/32" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 000000 | 00000 |
0.379" | 9/16" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 0000 |
For 1/2" Shaft Dia. | |||||||
0.504" | 19/32" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 0000000 | 00000 |
0.504" | 3/4" | 1/2" | 155 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | ||||||||||
8mm | 10mm | 11mm | 1.5mm | 155 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | ||||||||||
8mm | 5mm | 11mm | 1.5mm | 155 lbs. @ 120 rpm | 300 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
4 mm Shaft Dia. | ||||||||||
8 | 5 | 11 | 1.5 | 155 lbs. @ 120 rpm | 300 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | |||||||||||
8mm | 10mm | 11mm | 1.5mm | 155 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW bearings and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | ||||||||||
3/8" | 1/2" | 9/16" | 1/32" | 155 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 000000 |
For 3/8" Shaft Dia. | ||||||||||
15/32" | 1/2" | 11/16" | 3/64" | 155 lbs. @ 120 rpm | 120 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
1/2" | 1/2" | 5/8" | 1/16" | 155 lbs. @ 120 rpm | 100 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
5/8" | 1/2" | 7/8" | 1/8" | 155 lbs. @ 120 rpm | 175 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
For 1/2" Shaft Dia. | ||||||||||
19/32" | 1/2" | 7/8" | 3/64" | 155 lbs. @ 120 rpm | 145 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
3/4" | 1/2" | 1" | 1/8" | 155 lbs. @ 120 rpm | 185 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
Water-Resistant Dry-Running Flanged Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
3/8" | 1/2" | 9/16" | 1/32" | 155 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 000000 |
For 3/8" Shaft Dia. | |||||||||
15/32" | 1/2" | 11/16" | 3/64" | 155 lbs. @ 120 rpm | 120 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
1/2" | 1/2" | 5/8" | 1/16" | 155 lbs. @ 120 rpm | 100 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
5/8" | 1/2" | 7/8" | 1/8" | 155 lbs. @ 120 rpm | 175 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
For 1/2" Shaft Dia. | |||||||||
19/32" | 1/2" | 7/8" | 3/64" | 155 lbs. @ 120 rpm | 145 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
3/4" | 1/2" | 1" | 1/8" | 155 lbs. @ 120 rpm | 185 lbs. @ 120 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/32" Shaft Dia. | ||||||||||
5/16" | 1/4" | 7/16" | 1/16" | 155 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 000000 |
Metric 932 Bearing Bronze Bearings | ||||||||||
For 5mm Shaft Dia. | ||||||||||
8mm | 5mm | 11mm | 1.5mm | 155 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 0000 |