About Plain Bearings
More
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
1/2" | 1" | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 000000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 3/4" | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
3/4" | 3/4" | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
Metric 954 Aluminum-Bronze Bearings | ||||||
For 12mm Shaft Dia. | ||||||
16mm | 20mm | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
20mm | 20mm | 1,650 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
5/8" | 1" | 7/8" | 1/16" | 1,650 lbs. @ 120 rpm | 2,200 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 000000 |
For 1/2" Shaft Dia. | |||||||||
5/8" | 3/4" | 7/8" | 1/8" | 1,650 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
3/4" | 3/4" | 1" | 1/8" | 1,650 lbs. @ 120 rpm | 2,300 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
For 12mm Shaft Dia. | |||||||||
14mm | 20mm | 16mm | 1mm | 1,650 lbs. @ 120 rpm | 610 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
16mm | 20mm | 20mm | 2mm | 1,650 lbs. @ 120 rpm | 1,400 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
20mm | 20mm | 28mm | 4mm | 1,650 lbs. @ 120 rpm | 2,800 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |