About Plain Bearings
More
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Fiberglass-backed PTFE are strong and vibration resistant. A layer of PTFE on the ID of the bearing reduces friction.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
Fiberglass-Backed PTFE Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||
3/4" | 3/4" | 1,850 lbs. @ 120 rpm | Gray | -55° to 280° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | ||||||
1/2" | 1 1/4" | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
9/16" | 1 1/4" | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||
For 10mm Shaft Dia. | ||||||
12mm | 30mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
14mm | 30mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
14mm | 25mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
16mm | 25mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
18mm | 25mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
25mm | 25mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |