About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
13/16" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
7/8" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
15/16" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
1" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/16" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/8" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/4" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 15/16" Shaft Dia. | |||||||
1 3/16" | 1" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
1 1/4" | 1" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 20 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
24 | 30 | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
25 | 30 | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
26 | 30 | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
28 | 30 | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
7/8" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
1" | 1 1/4" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 20mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
26 | 30 | 1,850 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
Vibration-Damping Oil-Embedded Sleeve Bearings
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Shell Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings with Steel Shell and Neoprene Rubber Cushion | ||||||||
---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||
1 1/4" | 1 1/4" | 1 1/8" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 0° to 220° | 0000000 | 000000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 20mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
26mm | 30mm | 1,850 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 000000 |
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
3/4" | 3/4" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
13/16" | 3/4" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
7/8" | 3/4" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
1" | 3/4" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
7/8" | 5/8" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
1" | 5/8" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||
For 15mm Shaft Dia. | ||||||
19mm | 20mm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
21mm | 20mm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
For 25mm Shaft Dia. | ||||||
28mm | 12mm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
30mm | 12mm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
1" | 1 1/4" | 1 1/4" | 3/16" | 1,850 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
13/16" | 1 1/2" | 1" | 1/8" | 1,850 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
For 3/4" Shaft Dia. | ||||||||||
15/16" | 1 1/4" | 1 1/4" | 1/8" | 1,850 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
1" | 1 1/4" | 1 1/4" | 3/16" | 1,850 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 0000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||||
1" | 1 1/4" | 1 1/4" | 3/16" | 1,850 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings with Certification
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
1" | 1 1/4" | 1 1/4" | 3/16" | 1,850 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
3/4" | 3/4" | 1" | 1/8" | 1,850 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
13/16" | 3/4" | 1" | 1/8" | 1,850 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
7/8" | 3/4" | 1 1/8" | 1/8" | 1,850 lbs. @ 60 rpm | 2,700 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||||
1" | 5/8" | 1 1/4" | 3/16" | 1,850 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Metric 932 Bearing Bronze Bearings | ||||||||||
For 15mm Shaft Dia. | ||||||||||
19mm | 20mm | 23mm | 2mm | 1,850 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
21mm | 20mm | 27mm | 3mm | 1,850 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
High-Speed Oil-Embedded Mounted Sleeve Bearings
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.
Bearings with an oil cup have a reservoir that distributes additional oil onto the bearing. A self-closing hinged cover keeps out contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
With Oil Cup | ||||||||||||||
3/4" | 15/16" | 2" | 4 1/32" | 1 1/4" | 1 1/4" | 21/32" | 21/64" | 2 31/32" | 1,850 lbs. @ 60 rpm | -40° to 240° | Self Aligning | Lubricated | 0000000 | 000000 |
Vibration-Damping Oil-Embedded Mounted Sleeve Bearings
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise. At startup, friction causes the bearing to release a thin layer of oil on the bearing’s surface. All are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
841 Bearing Bronze Bearings with Steel Housing | ||||||||||||||
3/4" | 45/64" | 1 13/32" | 3 3/4" | 1 1/4" | 1 1/4" | 9/16" | 3/8" | 3" | 1,850 lbs. @ 60 rpm | 0° to 225° | Self Aligning | Lubricated | 0000000 | 000000 |