About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Ball and Roller Bearings
More
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6005 | 25mm | 47mm | 12mm | Steel | 1,900 | 1,050 | 8,300 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Sealed | ||||||||||||
6005-2RS | 25mm | 47mm | 12mm | Steel | 1,900 | 1,050 | 8,300 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6300-2Z | 10 | 35 | 11 | Steel | 1,900 | 760 | 26,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 000000 |
Sealed | ||||||||||||
6300-2RS | 10 | 35 | 11 | Steel | 1,900 | 760 | 15,000 | Lubricated | -20° to 210° | ABEC-3 | 00000000 | 00000 |
Self-Aligning Ball Bearings
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2201 | 12 | 32 | 14 | Steel | 1,900 | 420 | 30,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 0000000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6005 | 25mm | 47mm | 12mm | 440C Stainless Steel | 1,900 | 1,050 | 18,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 000000 |
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6005-2Z | 25mm | 47mm | 12mm | 440C Stainless Steel | 1,900 | 1,050 | 15,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 000000 |
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
R18-2RS | 1 1/8" | 2 1/8" | 1/2" | 440C Stainless Steel | 1,900 | 1,250 | 8,000 | Lubricated | -20° to 210° | ABEC-1 | 00000000 | 000000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
6005-2RS | 25 | 47 | 12 | 440C Stainless Steel | 1,900 | 1,050 | 8,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
11/16" | 7/8" | 1/2" | Steel | 1,900 | 2,950 | 15,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
20mm | 26mm | 12mm | Steel | 1,900 | 2,700 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
Sealed—Both Sides | ||||||||||||
20mm | 26mm | 16mm | Steel | 1,900 | 2,700 | 7,600 | Lubricated | 8 | 0° to 210° | DIN 618 | 0000000 | 00000 |
High-Load Threaded Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel | |||||||||||||||
Flat Rollers without Seal | |||||||||||||||
3/4" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 17/32" | 1/32" | 3,700 | 2,700 | 1,900 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
7/8" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 17/32" | 1/32" | 3,700 | 2,700 | 1,900 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Flat Rollers with Seal | |||||||||||||||
3/4" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 17/32" | 1/32" | 3,700 | 2,700 | 1,900 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
7/8" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 17/32" | 1/32" | 3,700 | 2,700 | 1,900 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Crowned Rollers with Seal | |||||||||||||||
3/4" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 17/32" | 1/32" | 3,700 | 2,700 | 1,900 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
7/8" | 1/2" | 7/16" | 7/8" | 7/16"-20 | 3/8" | 17/32" | 1/32" | 3,700 | 2,700 | 1,900 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Thrust-Load-Rated Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
2 1/2" | 1 5/8" | 1" | 2 1/4" | 1"-14 | 1 1/2" | 1 1/4" | 1/16" | 4,000 | 2,200 | 1,900 | 1,300 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
Threaded V-Groove Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
3 1/2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 1 1/4" | 5/8" | 4,000 | 2,200 | 1,900 | 1,400 | 225° | Ball | Mounting Hardware | 0000000 | 0000000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||
3 1/2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/64" | 1 1/2" | 1/16" | 1 1/4" | 5/8" | 4,000 | 2,200 | 1,900 | 1,300 | 225° | Mounting Hardware | 0000000 | 0000000 |